Ford Genuine Ford Fluid PM-1-C High Performance DOT-3 Motor Vehicle Brake Fluid - 12 oz.
Product Description
Ford Genuine Ford Fluid PM-1-C High Performance DOT-3 Motor Vehicle Brake Fluid - 12 oz.
- For vehicles with disc, drum or ABS
- Factory-fill formulation
- Minimum wet boiling point of 284°F (140°C) and a dry boiling point of 500°F (260°C)
- Check brake fluid reservoir cap or master cylinder reservoir; owner guide and/or workshop manual for proper brake fluid usage
- Same high quality formula
The right fluid for Ford, Lincoln and Mercury braking systems. For vehicles with disc, drum or ABS brakes. Minimum dry boiling point of 500°F (260°C). Recommended by Ford Motor Company. Available in 12 fluid ounce bottles.
Technical Specifications
You might also like
Genuine Ford Fluid XG-3-A Silicone Brake Caliper Grease and Dielectric Compound - 3 oz.
Genuine Ford XT-5-QM MERCON-V Automatic Transmission and Power Steering Fluid - 1 Quart
Genuine Ford Fluid VC-7-B Gold Concentrated Antifreeze/Coolant - 1 Gallon (Packaging may vary)
Genuine Ford Fluid XT-10-QLVC MERCON-LV Automatic Transmission Fluid - 1 Quart
Genuine Ford XT-5-5QM MERCON-V Automatic Transmission and Power Steering Fluid - 5 Quart
Genuine Ford Fluid XY-75W140-QL SAE 75W-140 Synthetic Rear Axle Lubricant - 1 Quart
Genuine Ford Fluid VC-1 Premium Cooling System Flush - 22 oz.
Genuine Ford Fluid XY-80W90-QL SAE 80W-90 Premium Rear Axle Lubricant - 1 Quart
Genuine Ford Fluid VC-7DIL-B Gold Pre-Diluted Antifreeze/Coolant - 1 Gallon
Genuine Ford Fluid VC-3DIL-B Orange Pre-Diluted Antifreeze/Coolant - 1 Gallon