GTJ White Striped Frosted Window Privacy Film, Static Cling, 17.5 x 78.7 in

GTJ White Striped Frosted Window Privacy Film, Static Cling, 17.5 x 78.7 in

• White Frosted Privacy with Striped Texture: The white frosted finish covers the entire film with no clear gaps. Its irregular linear texture blurs shapes and details while allowing soft daylight into bathrooms, bedrooms, glass doors, and home offices.
• Static Cling, No Adhesive: Apply the window film to clean, smooth glass using plenty of water or water mixed with a few drops of liquid soap. The window film can be repositioned while wet and removed later without sticky residue. Keep the cling side clean and store the window film flat for reuse.
• Remove the Clear Protective Liner: Use both peel-assist stickers at the same corner. Attach one sticker to the window film and the other to the clear liner, press firmly, then pull them in opposite directions to separate the film from the liner. If needed, reposition the stickers or try another corner.
• Install on Wet Glass, Tools Included: Clean the glass, spray plenty of water, remove the liner, and place the exposed cling side against the wet surface. Slide the film into position, squeegee out excess water and air, then trim the edges. A spray bottle, squeegee, utility knife, and peel-assist stickers are included.
• Smooth, Flat Glass Only: Do not apply to textured, rough, uneven, pre-frosted, cracked, or curved glass. The film may not cling if the surface is too dry, the liner remains attached, or the wrong side faces the glass. It softens light and glare but is not a blackout film.