GTJ Rainbow Tulip Window Privacy Film, Static Cling, 47.2 x 157.5 in

GTJ Rainbow Tulip Window Privacy Film, Static Cling, 47.2 x 157.5 in

• 3D Tulip Texture and Rainbow Colors: The translucent frosted film has an embossed tulip pattern with a lightly raised texture that gives the glass a 3D decorative finish. Its holographic surface catches direct sunlight and creates shifting rainbow colors. The colors may look softer on cloudy days or shaded windows.
• Frosted Privacy at Normal Viewing Distance: The embossed tulip pattern blurs shapes and details from both sides while still allowing natural light through. It provides good privacy at normal viewing distances, but outlines may remain visible at close range. Privacy can vary with lighting and viewing distance.
• Static Cling, No Glue: Apply the window film to clean, smooth glass with plenty of water or water mixed with a few drops of mild dish soap. It can be adjusted while wet, removed without sticky residue, and reused when the cling side is kept clean and stored flat.
• Remove the Clear Liner First: Use both peel-assist stickers at the same corner. Place one sticker on the window film and the other on the clear protective liner, press both firmly, then pull in opposite directions to separate the film from the liner. Reposition the stickers or try another corner if the liner is difficult to lift.
• Wet Installation, Tools Included: Clean the glass, spray the surface thoroughly, remove the liner completely, and place the exposed cling side against the wet glass. Slide the film into position, push out water and air with the squeegee, then trim the edges. A spray bottle, squeegee, utility knife, and peel-assist stickers are included. Use only on clean, smooth, flat glass; do not apply to textured, rough, uneven, pre-frosted, cracked, or curved glass.