GTJ Frosted Glass Window Film for Privacy, Static Cling,17.5" x 78.7"in

GTJ Frosted Glass Window Film for Privacy, Static Cling,17.5" x 78.7"in

• Frosted Privacy with Irregular Stripes: Irregular frosted stripes cover the entire film, helping blur shapes and details while still letting natural light through. It provides added privacy day and night, though outlines may remain visible at close range or under strong backlighting. Not intended for complete blackout.
• Static Cling, No Glue: Apply the window film to clean, smooth glass with plenty of water or water mixed with a few drops of mild dish soap. It can be repositioned while wet, removed without sticky residue, and reused when the cling side is kept clean and stored flat.
• Remove the Clear Liner First: Use both peel-assist stickers at the same corner. Place one sticker on the window film and the other on the clear protective liner, press both firmly, then pull in opposite directions to separate the film from the liner. Reposition the stickers or try another corner if the liner is difficult to lift.
• Wet Installation, Tools Included: Clean the glass, spray the entire surface thoroughly, remove the liner completely, and place the exposed cling side against the wet glass. Slide the film into position, push excess water and air toward the edges with the squeegee, then trim the film if needed. A spray bottle, squeegee, utility knife, and peel-assist stickers are included.
• Smooth, Flat Glass Only: Use only on clean, smooth, flat glass. Do not apply to textured, rough, uneven, pre-frosted, cracked, or curved glass. The film may not cling properly if the glass is too dry, the clear liner remains attached, or the wrong side faces the glass. It allows light through but is not a blackout film.