GTJ Blackout Window Privacy Film, Static Cling No Glue, 17.5 x 157.5 in

GTJ Blackout Window Privacy Film, Static Cling No Glue, 17.5 x 157.5 in

• 100% Blackout Coverage: The opaque black film blocks light and outside views through the covered glass area. It works well for bedrooms, media rooms, nurseries, glass doors, and home offices. Light may still enter through uncovered edges.
• Static Cling, No Glue: Apply the window film to clean, smooth glass with plenty of water or water mixed with a few drops of liquid soap. It can be adjusted while wet, removed without sticky residue, and reused when kept clean and stored flat.
• Remove the Clear Liner First: Use both peel-assist stickers at the same corner. Place one sticker on the window film and the other on the clear liner, press firmly, then pull in opposite directions to separate them. Try another corner if the liner is difficult to lift.
• Wet Installation, Tools Included: Clean the glass, spray the surface thoroughly, remove the liner, and place the cling side against the wet glass. Slide the film into place, push out water and air with the squeegee, then trim the edges. A spray bottle, squeegee, utility knife, and peel-assist stickers are included.
• Smooth, Flat Glass Only: Apply only to clean, smooth, flat glass. Do not use on textured, rough, uneven, pre-frosted, cracked, or curved glass. For double-pane, insulated, or Low-E windows, check the window manufacturer’s guidance before installation. The film may not cling properly if the surface is too dry, the clear liner remains attached, or the wrong side faces the glass.