Industrial & Scientific > Temperature & Humidity > Temperature Probes & Sensors

Fieldpiece ATC1 Pipe-Clamp Thermocouple 3/8 x 1 3/8" for Air Conditioning

Product ID: B0093HQ2US Condition: New

Sold Out

Product Description

The sensor is virtually isolated from ambient conditions, allowing the thermocouple to read the true pipe temperature for as long as it is attached
The sensor's large surface area and increased clamping force help the sensor reach the correct temperature within 30 seconds
Because the jaw is designed for HVAC/R, its clamping ability lets you measure temperatures of pipes that are fixed at any angle, to walls or other surfaces ATC1 jaw range: 3/8-Inch to 1-3/8-Inch pipe diameter
The sensor is virtually isolated from ambient conditions, allowing the thermocouple to read the true pipe temperature for as long as it is attached
The sensor's large surface area and increased clamping force help the sensor reach the correct temperature within 30 seconds
Because the jaw is designed for HVAC/R, its clamping ability lets you measure temperatures of pipes that are fixed
at any angle, to walls or other surfaces ATC1 jaw range: 3/8-Inch to 1-3/8-Inch pipe diameter

The ATC1, K-type, pipe clamp thermocouple is used to take temperatures of pipes or any other cylindrical surface within its 3/8-Inch to 1 3/8-Inch jaw range. Using a pipe clamp thermocouple greatly facilitates taking superheat or sub cooling measurements. Use the ATC1 for most A/C units. The ATC1 can be used with any of our meters that measure temperature and any thermometer accepting a K-type thermocouple.