Extech 480172 AC Line Splitter, 120V 15A, 1X and 10X Multiplier
Product Description
Extech 480172 AC Line Splitter, 120V 15A, 1X and 10X Multiplier
- Enables successful thermographic inspection of high-voltage/current electrical environments
- Minimizes inspection time/cost and reduces the chance of injuries compared to other inspection methods
- Broadband Calcium Fluoride (CaF2) crystal - suitable for Visual, Thermal and Fusion inspections
- Rugged anodized aluminum frame with permanent hinged cover - no loose parts
- Useful for troubleshooting appliances, generators or electronics — helps detect overloads or abnormal current draw without rewiring
Extech 480172 AC Line Splitter, Provides Easy and Safe Measurements of Current without the Need to Cut Off the Plug and Separate the Conductors, Voltage Check Function
This Extech 480172 Line Splitter provides a fast and easy way to "open" standard 120 Volt AC electrical lines, eliminating the need to cut off the plug and separate the conductors. When connected between a 120 Volt AC outlet and a device under test, this splitter separates the hot/live conductor from the neutral and ground, which enables users to measure AC current up to 15 Amp on a two-wire or three-wire lines using a clamp meter. This splitter also features two Voltage Test jacks so that voltage can be measured using a multimeter.
Key Features- Provides easy and safe measurements of current without the need to cut off the plug and separate the conductors
- Plugging the power connector into the Line Splitter separates the hot/live conductor from the neutral (and ground)
- Voltage check function
- Two clamp positions: x1 for direct readings, x10 for actual reading multiplied by 10
- Dimensions: 5.25"x2"x1" (133x51x25mm)
- Weight: 5.8 oz (164.4g)









