Erayco 10 Pack LM2596 DC to DC Buck Converter 3.0-40V to 1.5-35V Power Supply Step Down Module
Product Description
Erayco 10 Pack LM2596 DC to DC Buck Converter 3.0-40V to 1.5-35V Power Supply Step Down Module
- 【High Precision】The buck converter consists of 36u thickened circuit boards, high-Q inductance with output LED indicator, and superior solid-state capacitors that can effectively filter out high frequency noise. Suitable for various electronic projects.
- 【Input Voltage】DC 3V to 40V (input voltage must be 1.5V higher than the output voltage, no boost).
- 【Output Voltage】DC 1.5V to 35V voltage is continuously adjustable, maximum output current is 3A.
- 【Quantity】 10 pieces; Size: 43 * 21 * 13 mm
- 【Easy to DIY】Connect to power source, using a mini screwdriver to increase or decrease output voltage by adjusting the screw on the blue potentiometer and monitor voltage with multimeter to get the needed voltage, clockwise to step up voltage and counterclockwise to step down voltage. (Factory default stays a high voltage, you need to contrarotate about 7-15 circles before the voltage starts ramping down, 1 circle means +/- 1V)
Erayco 10 Pack LM2596 DC to DC Buck Converter 3.0-40V to 1.5-35V Power Supply Step Down Module
Features:
- DC to DC step down module
- Thickened circuit boards
- Advanced solid-state capacitor
- Short circuit and over-temperature protection
- 100% tested, sealed in anti-static packaging
Kindly Note:
1. Input voltage must be 1.5 V higher than the output voltage, no boost
2. Do not reverse the input and output interface
3. Keep output under 2.5A and use a heat sink when for a long time working
Specifications:
- Model: LM2596
- Input voltage: DC 3V - 40V
- Output Voltage: DC 1.5V - 35V (adjustable)
- Output Current: 3A (max.)
- Conversion Efficiency: 92% (max.)
- Switching Frequency : 65KHz
- Rectification: non-synchronous rectification
- Module property: non-isolated buck module
- Operating Temperature: -45℃ to +85℃
- Load Regulation: ±0.5%
- Voltage Regulation: ±2.5%
- Size(L x W x H): 45*21*13mm / 1.69*0.83*0.51inch
- Weight: 14g
Package List:
10pcs DC to DC Buck Converter Module
Technical Specifications
You might also like
bayite 3 Wire 0.36" DC 0~30V Digital Voltmeter Gauge Tester Blue LED Display Panel Mount Car Motorcycle Battery Monitor Volt Voltage Meter with Reverse Polarity Protection Pack of 5
6 Pack Mini MP1584EN DC-DC Buck Converter Adjustable Power Step Down Module 24V to 12V 9V 5V 3V (6 Pack)
[4-PACK] 5A DC-DC Adjustable Buck Converter 4~38v to 1.25-36v Step Down Power Supply High Efficiency Voltage Regulator Module ([4-pack] 5a buck)
Elcoho 10 Pieces Plastic Waterproof Boxes Junction Case Compatible with Electronic Project 3.94 × 2.36 × 0.98 Inches, Black
5 Pack Boost Converter Module XL6009 DC to DC 3.0-30 V to 5-35 V Output Voltage Adjustable Step-up Circuit Board (5 Pack)
AUSTOR 840 Pieces Preformed Breadboard Jumper Wire Kit, 14 Lengths Assorted Jumper Wire for Breadboard Prototyping Solder Circuits
Black Menba 3 Sets XT60 Parallel Battery Connector Cable for RC Multicopter Quadcopter
ESP-01S USB to ESP8266 ESP-01S Wireless Wifi Adapter Module Wi-Fi CH340G 4.5-5.5V, 115200 Baud Rate
TMC2208 V1.2 3D Printer Stepper Motor Driver Module, Eryone with Heat Sink Screwdriver for 3D Printer Mother Boards Reprap MKS Prusa and More (5pcs/Pack)
4 pcs DC 5V 1 Channel Relay Module Board Shield High/low Level Trigger with Optocoupler for Arduino