Enerwave ZW15S Z-Wave Wireless 3 Way Switch, 120VAC 15A 60Hz 1000W Incandescent with Free Screwless Wall Plate, NEUTRAL WIRING REQUIRED, White
Product Description
Enerwave ZW15S Z-Wave Wireless 3 Way Switch, 120VAC 15A 60Hz 1000W Incandescent with Free Screwless Wall Plate, NEUTRAL WIRING REQUIRED, White
- The ZW15S is a Z-Wave Enabled/Controlled Switch Which Replaces Your Existing Standard Wall Switch to Enable Wireless On/Off Control to the Connected Load via Your Z-Wave Gateway. This Switch is Both Manual and Remote Controlled. The Switch has a Blue LED at the Base of the Switch Which Indicates the Location of the Switch When the Connected Load is Off.
- This Home Automated Smart Switch Allows for Manual and Remote Control from any Smart Phone, Tablet, PC or Mac or any Internet Connected Device. This Module is Fully Interoperable with Other Z-Wave Enabled Devices and can be Easily Added into your Z-Wave Network.
- The ON / OFF Control of the Connected Load can be Programmed into Z-Wave Scenes with Other Z-Wave Enabled Devices, with Dynamic Scheduling and Events from Programmable from Anywhere. The Switch Also Functions as a Z-Wave Signal Repeater Which Will Re-Transmit the Signal from the Hub/Gateway up to an Additional 100 sq ft. This Helps Route the Signal Around Obstacles and Radio Dead Spots.
- This Device Can be Used for A Single Pole (Single Location Switch) Application or in a 3-Way (Multi-Location) Setup with the ZW3K Auxillary Switch (Sold Separately). Switch Comes with Two Wall Plates, Child-Safe Screwless Wall Plate and a Standard Decroator Wall Plate. Screws Included.
- **NEUTRAL WIRING REQUIRED** Voltage: 120VAC, 60HZ, Incandescent: 1000W, Ballast: 1200VA, Resistive: 1800W (15A), Motor: 1/2HP, Z-Wave Frequency: 908.42MHz, Operating Temperature: 32° - 104° F, Range: Up to 100ft Line of Sight Between the Wireless Controller or Closest Z-Wave Receiver Module, Compatible with Any Type of Lighting: Incandescent, Halogen, CFL, LED, Xenon, etc...
Enjoy the freedom to wireless remote-control appliances such as lighting fixtures, fans and portable air conditioners. Have complete control to your devices and appliances by using Enerwave's SMART wireless control system built into the outlet. Enable you to make your home or business Z-wave controlled via smart phone or desktop app. Enerwave ZW15S Z-wave Wireless In Wall On/Off Three Way Switch is both a wireless manual way to control floor lamps, small appliances, fans, or anything plugged into a standard 3-prong outlet. The ZW15S On/Off switch is a perfect wireless manual and remote on/off control replacement or regular wall switch, controlling incandescent, LED, fluorescent, and ballast lighting. The ZW15S On/Off switch is fully compatible with other Z-wave devices, provides programmable function in custom settings such as scenes, association, scheduled events, etc. Also it can be added to most Z-wave compliant controllers. As part of any Z-Wave network, each device will be manually and / or remotely controlled by commands sent from the dash wave controllers in real time, but also act as a wireless repeater transmitting RF signal from one device to another, then extending the range of RF signal throughout the system. A sliding air-gap switch is added to totally disconnect power while replacing light bulbs and preventing from leakage from the fixture.
Technical Specifications
You might also like
Enerwave ZW3K-LA 3 Way Z Wave Auxillary Switch Addon to Enerwave Z-Wave Switches and Z-Wave Dimmers Wireless Home Automation, 120VAC 60Hz, NEUTRAL WIRING REQUIRED, Light Almond
GoControl WS15Z-1 Z-Wave Non-Dimming Wall Switch, White
Linear WD500Z-1 Z-Wave 500-Watt Wall-Mount Dimmer Switch
Enerwave ZW15R Z-Wave Wireless Duplex Outlet 15A Tamper Resistant Receptacles, 2 Free Wall Plates
Enerwave ZW3K 3-Way Add-On Switch for Light/Fan Control to Z-Wave Dimmer Switch ZW15S/ZW500D, Interchangeble Cover