EPLZON LM2596 Buck Converter with Voltmeter Display Buck Module DC-DC 4.0-40V to 1.25-37V 2A Voltage Adjustable Buck Converter Module(Pack of 2 Pcs)

EPLZON LM2596 Buck Converter with Voltmeter Display Buck Module DC-DC 4.0-40V to 1.25-37V 2A Voltage Adjustable Buck Converter Module(Pack of 2 Pcs)

• The buck converter consists of a 36u thickened circuit board, a high-Q inductor with an output LED indicator, and a high-quality solid-state capacitor that can effectively filter out high-frequency noise
• Product parameters: the input voltage is DC 4.0~40V, the output voltage is 1.25V-37V (continuously adjustable, the input voltage must be 1V higher than the output voltage), the output current is 2A (normal and stable), the maximum is 3A, and the conversion efficiency is 92% ( maximum), the output ripple is less than 30mV, the switching frequency is 150KHz, and the operating temperature is -45°C to 85°C.
• NOTE: This is a buck module. The input and output connectors cannot be reversed. The input voltage must be higher than the output voltage. A radiator is required for long-term work above 2A/15W. When using it for the first time, it is necessary to turn the potentiometer counterclockwise more than 10 times.
• High efficiency: 150KHz internal oscillation frequency, low power consumption, high efficiency. The conversion efficiency is as high as 92%. The input terminal is protected by a diode, and the reverse connection will not burn the module. With overheat protection and short circuit protection
• Application: The LM2596 step-down converter can be used in fields where the input voltage is higher than the step-down output voltage, such as batteries, power transformers, etc. Buck modules can be used in many electronics projects.