ELEGOO ABS-Like 3D Printer Resin Grey 1000g
Product Description
ELEGOO ABS-Like 3D Printer Resin Grey 1000g
- 【High Precision & Low Shrinkage】ELEGOO ABS-like resin features low volume shrinkage and linear shrinkage. Low shrinkage and high stability ensure 3D prints with incredibly smooth surface finishes, fine texture and accurate dimensions. Every detail is delicate and clear.
- 【Good Toughness & Non-Brittle】Similar to ABS thermoplastic materials, the resin has good toughness, excellent impact strength and high mechanical properties, strong scratch resistance, is not brittle, can drill holes, suitable for printing tough industrial parts.
- 【Good Fluidity & Fast Curing】With good fluidity, the resin can quickly backflow and solidify to shape, which shortens the printing time, improves the success rate of model printing, and reduces resin adhesion to the FEP film.
- 【Pure and Vivid Colors】ELEGOO ABS-like resins contain high-quality pigments and photoinitiators, so the models printed with resin have a very pure and stunning color effect, just like works of art.
- 【Wide Application】Compatible with most LCD 3D printers using 405nm UV light source technology, with a wide range of applications from tabletop models to industrial parts that require a certain strength or toughness.
ELEGOO photopolymer resin is a type of polymer that changes its physical properties when introduced to light. In the case of 3D printing , these are typically liquid plastic resins that harden when exposed to a light source, which works perfectly with our Photocuring resin
Usage condition :
1) Shake up the bottle before use and avoid direct sunlight and dusty environment
2) Do not drink it and keep it out of the reach of children
3) Please wear a mask and gloves when using to avoid direct skin contact and maintain indoor ventilation
4) If you got skin contact please wash away with waters immediately and if you feel discomfort please see a doctor ASAP.
5) Once the model is complete, please wash it with high 95% degree or higher ethanol alcohol for 30 seconds at least
6)If you don't use the resin please do not leave them in the resin tank over 48 hours or put them back to its original bottle and seal it.
Material Properties :
Curing wave-length: 405 nm
Hardness: 79.0 D
Shrinkage: 7.1 %
Viscosity (25°): 552.0 mpa.s
Liquid density: 1.100 g/cm³
Solid density: 1.184 g/cm³
Tensile strength: 23.4 Mpa
Elongation at break: 14.2 %
Curing time: 6-10 s
Color option: Grey, White, Green, Black, Transparent, Yellow, Blue, Red
Shelf life: 1 year
Technical Specifications
You might also like
ELEGOO Mars UV Photocuring LCD 3D Printer with 3.5'' Smart Touch Color Screen Off-line Print 4.72"(L) x 2.68"(W) x 6.1"(H) Printing Size Black Version
ELEGOO 2PCs FEP Release Film for ELEGOO Mars LCD 3D Printer 140200 MM 0.127mm Thickness
LOCK & LOCK HPL933BT Pickle Container
10-Pack RocketBus Small Fine Edging Tinting Vinyl Installation Hand Held Applicator Rubber Squeegee for Car Auto Tint Glass Film Bubble Remover Remove
ANYCUBIC 3D Printer Resin, 405nm SLA UV-Curing Resin with High Precision and Quick Curing & Excellent Fluidity for LCD 3D Printing - 500ML/Black
ANYCUBIC Photon UV LCD 3D Printer Assembled Innovation with 2.8'' Smart Touch Color Screen Off-line Print 4.53"(L) x 2.56"(W) x 6.1"(H) Printing Size
Jeteven 100 Pack 100 Micron Strainer Cone Funnel with 1 Pcs Silicone Funnel, Strainer Cone Funnel with Filter, Cone Paint Filter Fine Nylon Mesh
UV Resin Curing Light for SLA 3D Printer/DLP 3D Printer solidify photosensitive Resin 405nm UV Resin with 60w Output Affect
LONGER SLA 3D Printer, Resin 3D Printer with Touch Color Screen, Parallel LED Lighting, Off-line Printing Build Size 3.86 x 2.17x 5.5 inch (Orange 10)
ELEGOO 2 PCs Metal Resin Tank for ELEGOO Mars 3D Printer with 4 PCs FEP Liner, Masks, Gloves, Resin Vat for Mars, Photon and Epax X1