Tools & Home Improvement > Power Tools > Saws > Circular Saws

Dustless Technologies DustBuddie Dust Shroud for 7-1/4 in Worm Drive Saws

Product ID: B0116069Y8 Condition: New

$ 486

includes Duties & VAT

Delivery: 10-20 working days

Ships from USA warehouse.

Secure Transaction

VISA Mastercard ozow

Product Description

Dustless Technologies DustBuddie Dust Shroud for 7-1/4 in Worm Drive Saws

CAPTURES UP TO 99% OF CONCRETE DUST: front and rear rubber shields seal the cut line and pull silica dust straight into your shop vacuum instead of across the slab and into the air you breathe
FITS MOST 7-1/4 INCH WORM DRIVE AND HYPOID SAWS: set the saw on the base plate, cinch the two hook-and-loop straps, connect your hose, and cut. No tools, no drilling, no permanent modification
BUILT FOR THE JOBSITE: abrasion-resistant ABS/polycarbonate housing over a heavy-duty metal base plate, with integrated wheels that protect the cut surface and keep the saw gliding straight
CLEAR SIGHT LINE ON EVERY CUT: the open-front design keeps the blade and your layout line visible, so dust control does not cost you accuracy on expansion joints, framing, or finish work
SUPPORTS OSHA SILICA TABLE 1 WORK PRACTICES: use with a HEPA vacuum rated 99% filtration at 25 CFM per inch of blade. Adapts to 1-1/4 and 1-1/2 inch hoses; 1.5 inch cuff and both shields included

The Dust Buddie is your solution to the dust cloud created when cutting concrete with a worm drive or hypoid circular saw. It is universal for 7-1/4" worm drive and hypoid circular saws. Using vacuum suction, it captures up to 99% of the dust created when cutting concrete and stone products. Six non-marking wheels allow the shroud and tool to glide with ease to keep cuts straighter and prevent damage to your work surface. There are no tools required for installation. The simple hook-and-loop attachment method allows you to get to work faster without hassle. This shroud is made of a durable blend of polycarbonate & ABS attached to a stainless steel base plate. Two rubber dust shields collect dust from both the front and (optionally) back of the blade. The Dust Buddie complies with OSHA silica laws and EPA regulations for point-of-origin dust collection. For full performance, use this shroud with a vacuum rated at 120 CFM or greater such as the Dustless HEPA Wet Dry Vacuum. This product connects to 1.25" and 1.5" hose cuffs using the included adapter. Includes (1) Dust Buddie, (1) primary front rubber dust shield, (1) optional rear rubber dust shield, (1) 1.5" x 1.5" swivel cuff adapter, (1) front spacer, and (1) releasable tie for keeping the hose out of the way.

Technical Specifications

Country

USA

Brand

Dustless

Manufacturer

Dustless Technologies

Binding

Tools & Home Improvement

PartNumber

D4000

Model

D4000

Color

['Black', 'Stainless']

Height

2.75

Length

18.5

Weight

2.68

Width

9.25

NumberOfItems

FEIN Turbo I Vacuum Cleaner, 5.8 Gallon, 1100W | Includes: 13 ft Suction Hose, Tool Coupling with Suction Power Control, Cellulose Filter, 1 Fleece Filter Bag