Duratrax Onyx 210 AC/DC Peak Charger with LCD

DuraTrax Onyx 210 AC/DC Peak Charger with Backlit LCD. Charge currents of 800mA, 1.5A, 3A and 5A plus 4-8 cell NiCd or NiMh compatibility makes this charger great for 1/18-1/8 scale electrics, nitro receiver packs and even transmitter batteries. FEATURES: Charges 4-8 cell NiCd or NiMh (4.8 - 9.6V) cells with a capacity range of 750-7500mAh NiCd and NiMh compatibility with custom peak detection Pushbutton controls, audible tones and a custom LED with backlight for easy setup and use Selectable charge currents of 800mA, 1.5A, 3A and 5A Automatic TRICKLE charge fills pack completely after peak charge for optimum battery performance Precise peak detection algorithm with automatic TRICKLE charge fills packs completely for optimum voltage and run time Built-in jack included for charging 4 or 5 cell NiCd or NiMh receiver batteries for nitro models and even transmitter batteries LCD shows battery voltage, charge current, time, capacity, battery type and more Small, lightweight switching AC power supply delivers up to 5 amps of charge current Solid state reverse polarity and current overload safety devices FIVE YEAR warranty (U. S. A. and Canada only) SPECIFICATIONS: AC Input: 110V AC 60Hz DC Input: 11-15V DC, built-in lead with alligator clips Battery Types: 4-8 NiCd or NiMh cells (4.8-9.6V) Battery Capacity Range: 750-7500mAh Fast Charge Current: 0.8A, 1.5A, 3A, 5A linear (40W) Fast Charge Termination: Peak detection Fast Charge Safety Timer: 90 minutes Peak Sensitivity: 8mV for NiCd, 4mV for NiMh Auto TRICKLE Current: 1/20 fast charge setting Input Control: 3-pushbuttons Display Type: 7-segment custom LCD with backlight Audible Tones: Indicate start, stop, errors Output Connections: Built-in lead with Kyosho type connector