Dunzy 20 Pcs Hurricane Window Clips for 1/2 Inch Plywood Steel, Silver

Dunzy 20 Pcs Hurricane Window Clips for 1/2 Inch Plywood Steel, Silver

• Ample Quantity and Small Size: you will receive 20 pieces universal hurricane clips for window, which can guard at least 2 windows in your home, which are approx. 2 x 1.2 x 0.86 inches in length, width and height and approx. 0.03 inch in thickness, small and convenient for storage
• Dependable to Serve You: the hurricane shutters for windows exterior are made of hard wearing, strong, and rust resistant zinc plated steel, reusable and reliable, which can guard your windows during strong storms
• Easy to Apply: when you live in a hurricane risk area, you need to prepare your home before the storm hits, as the windows are vulnerable to hurricane spoil and you can guard them with plywood; The hurricane shutter clips are available in 1/2 inch plywood, suitable for use on brick, wood and stucco windows that protrude outward at a 90 degree right angle near the recessed window
• Installation and Removal: to fit the plywood, you need to measure the length of the window inside the frame and subtract 1/4 inch, place 2 hurricane board up clips along the edge of the plywood toward your tension leg, no more than 24 inches apart; You need 2 hurricane window clips on each side to push the plywood into the window frame, making sure the clips holding the frame; Remove the clips, press down on the plywood, while lifting the side tension legs, the plywood will come out
• Warm Notices: the hurricane clips do not fit vinyl siding; Please see the instructions for installation, removal and clip spacing based on window size and wind speed, for wind speeds up to 150 mph, depending on overall window size opening