Drilax 5 7/8 in Diamond Hole Saw for Toilet Cutouts & Lighting
Product Description
Drilax 5 7/8 in Diamond Hole Saw for Toilet Cutouts & Lighting
- CLEAN 5-7/8 IN CUTS WITHOUT CRACKING: Diamond-coated rim grinds smooth, precise holes in ceramic, porcelain, glass, granite, quartz, and engineered stone tile, preventing the chipping and cracking common with hammer-style bits.
- SIZED FOR TOILET CUTOUTS & SHOWER VALVES: Purpose-built diameter for toilet flange cutouts, shower diverter valve installs, recessed lighting in ceiling tile, and other large plumbing fixture openings.
- SOLID STEEL BODY, MINIMAL WOBBLE: One-piece steel construction spins true and dissipates heat efficiently, keeping cuts stable even on a standard hand drill instead of a bit that flexes or wanders mid-cut.
- FITS STANDARD DRILLS, NO GRINDER NEEDED: Universal 3/8 in shank works with most cordless and corded drills, delivering fast, clean large-hole cutting without switching to an angle grinder.
- 1-1/8 IN DEPTH WITH EXTRA-COATED GRIT: Generous body height and extra diamond coating handle deeper cuts in thick tile and stone, giving this hole saw the depth and durability for demanding toilet and valve jobs.
Almost 6 Inches in Diameter - VERY Large Size - Great Value
This Tool Does NOT Have Center Pilot Drill
Do NOT Use Dry
3/8 inch Shank Size
Can be used with Handheld or Upright Drillers
The diamond particule coating on DRILAX hole saws give superior performance and lifetime. Please note our tools do not need center pilot holes. Center pilot hole drills are mostly for wood, metal, etc.
Drilax tools can drill 1 " in depth.
Shank size is 3/8" - common electric or rechargeable drillers can be used.
Electroplated diamond coating will wear off if the tool gets too hot. Never let your drill bit run dry. Here is how you could use water to keep the tool cool:
a- You can build a mini water dam around the hole with plumbers putty.
b- You can choose to spray water on the drill bit.
c- Or you can use running water to cool the drill bit.
EASY TO USE
Center pilot drill bits are for wood, metal, etc.; Here is how you can keep the drill bit on target:
a- You can make your own guide out of plywood - plastic or even a card board. All you need is to keep the drill bit in place until it makes the initial marks.
b- You can start drilling at an angle, with the edge of the drill bit making a C slot and then getting the drill bit up to vertical.
c- You can manually guide the drill bit with wet sponge.
Please use protective gear.
DRILAX Diamond Hole Saw - USE WITH WATER
