Drilax 1-1/4 Inch Diamond Hole Saw for Tile, Glass, Granite & Stone, Diamond Drill Bit for Grab Bar Anchors, Tile Anchor Systems, Faucets, Ceramic, Porcelain & Quartz
Product Description
Drilax 1-1/4 Inch Diamond Hole Saw for Tile, Glass, Granite & Stone, Diamond Drill Bit for Grab Bar Anchors, Tile Anchor Systems, Faucets, Ceramic, Porcelain & Quartz
- IDEAL FOR GRAB BAR ANCHOR INSTALLATIONS: The 1-1/4 inch diameter is commonly used for tile anchor systems and grab bar mounting hardware that require a precise opening through porcelain, ceramic tile, marble, or stone. Perfect for bathroom safety upgrades where accuracy matters.
- HELPS PREVENT CRACKING EXPENSIVE TILE: Diamond grinding action cuts through hard materials without the aggressive impact forces associated with masonry bits. Designed to create clean openings in porcelain, ceramic, granite, quartz, glass, and natural stone.
- TRIPLE-COATED DIAMOND EDGE FOR LONGER LIFE: Built with a durable alloy steel body and triple-layer diamond coating to provide consistent cutting performance across hard surfaces. Suitable for both occasional DIY projects and professional installation work.
- START CLEANLY WITHOUT A PILOT BIT: Begin drilling at a slight angle to establish a guide groove, then gradually level the drill. This proven technique helps improve control and reduce surface skating on smooth tile and glass.
- PERFECT FOR FAUCETS, FIXTURES & TILE ANCHORS: Frequently used for grab bar anchor systems, countertop faucets, plumbing fixtures, bathroom accessories, and specialty mounting hardware that require a clean, accurately sized opening.
- WORKS ON TILE, GLASS, GRANITE, QUARTZ & STONE: Designed for porcelain tile, ceramic tile, glass, marble, granite, quartz, and other hard materials commonly found in kitchens, bathrooms, workshops, and renovation projects.
- USE WATER FOR CLEANER CUTS & LONGER TOOL LIFE: Wet drilling helps reduce heat buildup, improve cut quality, remove grinding debris, and extend the life of the diamond edge when working on hard materials.
This listing is for individual diamond hole saw - drill bit, you can select the sizes you need. Shank size is 3/8" or less. Drilax tools will fit standard hand drills and press drills.
Pick any size 1", 1-3/16", 1-1/4", 1-3/8,", 1-1/2", 1-5/8", 1-3/4", 2", 2-3/8".
The diamond particule coating on DRILAX hole saws give superior performance and lifetime. Please note our tools do not need center pilot holes. Center pilot hole drills are mostly for wood, metal, etc.
Drilax tools can drill 1 " in depth.
Never let your drill bit run dry. Electroplated diamond coating will wear off if the tool gets too hot. Here is how you could use water to keep the tool cool:
a- You can build a mini water pool around the hole with plumbers putty.
b- You can choose to spray water on the drill bit.
c- Or you can use running water to cool the drill bit.
EASY TO USE
Center pilot drill bits are for wood, metal, etc.; Here is how you can keep the drill bit on target:
a- You can make your own guide out of plywood - plastic or even a card board. All you need is to keep the drill bit in place until it makes the initial marks.
b- You can start drilling at an angle, with the edge of the drill bit making a C slot and then getting the drill bit up to vertical.
c- You can manually guide the drill bit with wet sponge.
Please use protective gear.
Drilax has a drill bit guide available on Amazon. The guide has a suction base. Just search for "Drilax Drill Guide" on Amazon..
Technical Specifications
You might also like
DRILAX Drill Bit Hole Saw Guide Jig Fixture Vacuum Suction Base with Water Coolant Hole
Drilax 2-1/2 inch Diamond Coated Drill Bit Hole Saw Ceramic Porcelain Tile Glass Fish Tank Marble Granite Quartz Holesaw Kitchen Bathroom Shower Faucet Drain Drilling Tool 2.5 Inch
4 1/2 Inch Diamond Hole Saw Diamond Tipped Porcelain Tile Ceramic Glass 4.5 Inch Hole Saw Drill Bit Standard Shank Easy To Use by DRILAX
Drilax 1 3/4 Inch Diamond Hole Saw Drill Bit Tiles, Glass, Fish Tanks, Marble, Granite Countertop, Ceramic, Porcelain, Coated Core Bits Holesaw DIY Kitchen, Bathroom, Shower, Faucet Installation Size 1 3/4" Inches
Drilax 3 inch Diamond Hole Saw Drill Bit Tiles, Glass, Fish Tanks, Marble, Granite Countertop, Ceramic, Porcelain, Coated Core Bits Holesaw DIY Kitchen, Bathroom, Shower, Faucet Installation
Kraus KGD-54BLACK Forteza Granite Kitchen Sink, 33 Inch, Black
Drilax 2 Inch Diamond Hole Saw Drill Bit Tiles, Glass, Fish Tanks, Marble, Granite Countertop, Ceramic, Porcelain, Coated Core Bits Holesaw DIY Kitchen, Bathroom, Shower, Faucet Installation Size 2"
LENOX Tools Hole Saw with Arbor, Speed Slot, 1-1/4-Inch (1772491)
Moen SMA1005CH Home Care Securemount, Chrome
SHDIATOOL Diamond Core Drill Bits 1-1/4 Inch for Porcelain Ceramic Tile Marble Brick Vacuum Brazed Hole saw 32mm