Denon Professional DNAVRX3300 7.2ch AV Surround Receiver with Wi-Fi, Bluetooth, Ethernet Connectivity and Rack Kit

Denon Professional DNAVRX3300 7.2ch AV Surround Receiver with Wi-Fi, Bluetooth, Ethernet Connectivity and Rack Kit

• 7.2 channel AV Receiver with 105W per channel (8ohms, 20Hz – 20kHz with 0.08% T.H.D.), Commercial grade internal power supply (no bulky AC adapter), Rack kit (Pre-Installed and Removable)
• Built-in Wi-Fi with 2.4GHz/5GHz dual band support; built-in Bluetooth, 4K/60 Hz full-rate pass-through, 4:4:4 color resolution, HDR and BT.2020, 8 HDMI inputs (incl. 1 front) with full HDCP 2.2 support; 2 HDMI outputs
• Dolby Atmos (up to 5.1.2) and DTS:X (via firmware update), Advanced Multi-Room options; 7.2ch Pre-out; RS232 Control / AirPlay, Bluetooth, Internet Radio, Spotify Connect, Pandora, SiriusXM Network Audio Streaming
• Number of Power Amps: 7 (Front L/R, Center, Surround L/R,Surround Back L/R) / Power Output: 215 watts per channel (maximum power output per channel), 135 watts per channel (6 ohms, 1 kHz, THD 0.7%, 2ch driven), 105 watts per channel (8 ohms,20 Hz - 20 kHz, THD 0.08%, 2ch driven), Speaker impedance: 4-16 ohms / Preamplifier Section: Input sensitivity: /impedance 200 mV / 47 kohms, Frequency response: 10 Hz - 100 kHz — +1, –3 dB (DIRECT mode), S/N Ratio: 100 dB (IHF-A weighted, DIRECT mode) / FM Section: Tuning frequency range: 87.5 - 107.9 MHz / AM Section: Tuning frequency range: 520 kHz – 1710 kHz / General: Power supply: AC 120 V / 60 Hz, Power consumption: 600 W (Standby 0.1 W, CEC standby 0.5 W), Power consumption: No-Sound 45 W (ECO on), 80 W (ECO off), Dimensions: (W x H x D) 17.1 x 15.3 x 6.6 inches (434 x 389 x 168mm) (without rack ears), Weight: 23.8 lbs. (10.8kg) (without rack ears)
• In: HDMI (Front 1) x 6, Component (video) x 2, Analogue Audio x 5, Digital Optical / Coaxial x 2 / x 2, USB (front) x 1 - Out: HDMI Monitor / Zone 2 x 1 / x 1, Composite Monitor x 1, Audio Preout (SW) 7.2 ch, Zone 2 Preout 2.0 ch, Phones x 1