Industrial & Scientific > Hazardous Material Handling

Deck Grip Non-Slip Sealer (5 Gallon) Clear Barefoot-Friendly Anti-Slip Coating - Create Traction for Outdoor or Indoor Floors and Pool Decks

Product ID: B007SVYNY8 Condition: New

$ 2,210

includes Duties & VAT

Delivery: 10-20 working days

Ships from USA warehouse.

Secure Transaction

VISA Mastercard ozow

Product Description

Deck Grip Non-Slip Sealer (5 Gallon) Clear Barefoot-Friendly Anti-Slip Coating - Create Traction for Outdoor or Indoor Floors and Pool Decks

Deck Grip is a water-based acrylic coating that improves surface traction without affecting appearance. The clear, semi-gloss finish is barefoot-friendly and ideal for residential or commercial use.
Suitable for sealed or unsealed concrete, natural and manufactured stone, stamped concrete, exposed aggregate, slate, tile, flagstone, and brick. Ideal for areas like pool surrounds, patios, driveways, walkways, garages, and entryways. Not intended for wood or composite materials.
When applied and maintained correctly, Deck Grip provides lasting traction enhancement. To clean, simply sweep and rinse as needed. For more thorough maintenance, use a pH-neutral cleaner and soft-bristle brush.
Low-odor and user-friendly, Deck Grip requires minimal preparation. Apply using a 3/8” nap roller (included) in two thin coats for optimal results. Allow 6–12 hours before light foot traffic and 24 hours for full use.

SlipDoctors Deck-O-Grip is a non-yellowing, water-based, blended, polymer-based, high solids, liquid sealer for decorative concrete. The product is clear, transparent and easy to apply. Deck-O-Grip also offers greatly improved chemical resistance when compared to standard acrylic-only based curing and sealing compounds. The product has been formulated to seal and protect decorative colored concrete by producing a hard, yet flexible, clear film. The compound contains a slip-resistant additive, which produces a slip-resistant surface, for use on traditionally slippery areas. Provides a totally clear membrane that will not yellow. Seals all concrete surfaces, providing a glossy appearance and easier cleanup. Offers excellent slip resistance for slippery surfaces. Dustproofs concrete with a tough, durable film. Helps minimize spelling of exterior concrete. Applies easily. May be used on all concrete surfaces, including stamped or stained concrete. Provides a clear, tough film, which improves abrasion and stain resistance. Offers improved resistance to rain, sun, freezing temperatures, most acids and industrial chemicals, oil, grease, deicing salts, cleaning agents (except aromatic solvents), caustics, airborne soot, dust and other pollutants. Seals and enhances the beauty of many concrete surfaces for years. Can be recoated after thorough surface cleaning to restore original beauty. Dried film is USDA accepted. Drying Time at 73 degrees F, 50 percent RH: 2-3 hours. Re-coat: 4-24 hours. Foot traffic: 6-12 hours. Wheel traffic: 24 hours. VOC content: 10.8 g/L. Adhesion to concrete: excellent. Ultraviolet Light (UV) Degradation ASTM C 1315, 8.86, Class A. Ultraviolet resistance: non-yellowing. Chalk resistance: no chalking. Check/peel resistance: no deterioration. Alkali resistance: excellent.