Drilax Diamond Hole Saw Set for Tile Glass Porcelain Granite, 5 Pc 3/4 to 1-1/2 Inch Kit with Guide and Case, Clean Cuts for Faucet Drain Planter Holes
Product Description
Drilax Diamond Hole Saw Set for Tile Glass Porcelain Granite, 5 Pc 3/4 to 1-1/2 Inch Kit with Guide and Case, Clean Cuts for Faucet Drain Planter Holes
- Designed To Prevent Cracks In Tile And Stone: Diamond grinding edge cuts smoothly instead of chipping or shattering, helping you drill into porcelain, ceramic, granite, and glass without damaging expensive materials
- Includes Foam Guide For Perfect Hole Starts: Holds the bit steady to prevent wandering and creates a water reservoir for cooling, helping you drill clean, centered holes even on smooth surfaces
- 5 Essential Sizes For Real Home Projects: Includes 3/4, 1, 1-1/4, 1-3/8, and 1-1/2 inch sizes for installing faucets, drains, fixtures, and adding drainage holes to ceramic planters
- Delivers Clean Holes With Minimal Chipping: Produces smooth, precise openings in tile, glass, and stone so finished installations look professional and fit correctly
- Optimized For Performance With Proper Cooling Use: Use with water and light pressure to reduce heat buildup, extend tool life, and maintain consistent cutting performance
- Complete Kit With Case For Easy Storage And Use: Keeps all sizes organized and protected, making it easy to carry between projects and always have the right bit on hand
The diamond particule coating on DRILAX hole saws give superior performance and lifetime. Please note our tools do not need center pilot holes. Center pilot hole drills are mostly for wood, metal, etc.
Drilax tools can drill 1 1/4" in depth.
Shank sizes vary but the largest shank is 3/8" - common electric or rechargable drillers can be used.
Electroplated diamond coating will wear off if the tool gets too hot. Never let your drill bit run dry. Here is how you could use water to keep the tool cool:
a- You can build a mini water dam around the hole with plumbers putty.
b- You can choose to spray water on the drill bit.
c- Or you can use running water to cool the drill bit.
EASY TO USE
Center pilot drill bits are for wood, metal, etc.; Here is how you can keep the drill bit on target:
a- You can make your own guide out of plywood - plastic or even a card board. All you need is to keep the drill bit in place until it makes the initial marks.
b- You can start drilling at an angle, with the edge of the drill bit making a C slot and then getting the drill bit up to vertical.
c- You can manually guide the drill bit with wet sponge.
Please use protective gear.









