DPTOOL Engine Timing Tool Kit for GM Buick Cadillac 2.0L LSY 2.7L L3B

DPTOOL Engine Timing Tool Kit for GM Buick Cadillac 2.0L LSY 2.7L L3B

• Application: This timing tool kit fit 2.7L L3B 2.0L LSY engine. for CT5 2.0L LSY 2020-2024, for CT6 2.0L LSY 2016-2019, for XT4 2.0L LSY 2019-2024, for XT5 2.0L LSY 2020-2024, for XT6 2.0L LSY 2021-2024, for Envision 2.0L LSY 2020-2024, for Blazer 2.0L LSY 2020-2024, for Acadia 2.0L LSY 2020-2023,for CT4 2.7L L3B 2020-2024, for CT4-V 2.7L L3B 2022-2024, for Colorado 2.7L L3B 2023-2024, for Canyon 2.7L L3B 2023-2024, for Silverado 1500 2.7L L3B 2019-2024, for Sierra 1500 2.7L L3B 2019-2024
• Function: When camshaft timing or actuator service is required, the actuators must be held in order to remove and install the oil control valves (OCV), which act as fasteners to attach the camshaft actuators to the camshafts. EN-52461 ensures the actuators are held in the timed position for OCV service, and are used to remove all slack from the timing chain prior to timing chain, actuator, or camshaft service
• OEM Equivalent Part Number: EN-52436, EN-52461, EN-52461-100, EN-52461-200, EN-52462, EN-52442, EN-52476, GM-52461, GM-52462-A, GM-52476. This timing tool set includes EN-52436 timing chain tensioner retention tool, EN-52461 camshaft torque reaction tool, EN-52462-a camshaft alignment tool, EN-52476 flywheel locking tool, EN-52442 engine balance shaft holding tool, EN-52461-100 and EN-52461-200 torque adapters cam phaser adapter
• How To Use: EN-52476 installs in place of the starter and ensures that the flywheel is in the timed position for timing chain service. It also locks the flywheel ring gear teeth to allow flywheel bolt, balancer bolt, and camshaft actuator installation and torqueing. Once the body of EN‑52476 is installed in place of the starter, the flywheel is turned until the spring-loaded lock pin engages into the timing hole in the flywheel
• Tips for Use: The timing pin must be retracted before torqueing any fasteners. Torqueing fasteners with the timing pin engaged in the flywheel timing hole will damage the timing pin on EN-52476