DPTOOL 3.6 Pentastar Timing Tool Kit for Jeep Chrysler Dodge VW 2011-2019

DPTOOL 3.6 Pentastar Timing Tool Kit for Jeep Chrysler Dodge VW 2011-2019

• A Complete Set: This 3.6l Pentastar timing tool kit includes 10369a 10200a-1 10200a-2 timing chain holders, 10202a phaser locks, camshaft tensioner locking pin, 2025200090 camshaft holding tool, 10198a crankshaft pulley wrench, a portable case and instruction manual
• Wide Application: This complete timing tool set is compatible with a wide range of 2011 to 2019 VW Chrysler Jeep Dodge Grand Cherokee Wrangler V6 3.6L VVT pentastar engine, and compatible with Chrysler /Grand Cherokee/Durango /Ram 1500/Wrangler JL/Gladiator 3.6L WD WK JL DT engine. Note: NOTE suitable for VVL models after 2019
• Function: The camshaft phaser timing tool is used to hold the Camshaft/Phaser`s while performing the loosening and tightening of the Oil Control Valves, and used to loosen the tension on the Timing Chains during Camshaft and Phaser service procedures; This camshaft holding tool is used to hold the camshaft in a right position when adjust timing or replace timing chain; This crankshaft vibration harmonic damper holder tool is used to hold the crankshaft pulley while they pulley retaining bolt is loosened/tightened
• OEM Equivalent Part Number: 10369A, 10200A, 10200A-1, 10200A-2, 10200A-3, 10202A, 10200A1, 10200A2, 10200A3, 10198A, 10369, 2025200090
• Tips: 10200-1 & 10200-3 are used on Drivers Side, 10200-2 is used on Passenger's Side. 2012 and newer models also require 10369A. Some 2011 models may also require 10369A, depending on the size of bolt in the front cover tightening sequence on the right bank (cylinder head closest to firewall). If that bolt head is 13MM you need 10369A. NOTE: Only compatible with VW Routan 3.6l, NOT compatible with VW other 3.6l