DIY CO2 Generator System Aquarium Plant Kit with Gauge Valve
Product Description
DIY CO2 Generator System Aquarium Plant Kit with Gauge Valve
- Complete CO2 System: The kit includes a main reactor body, suction , switching valve, and ferromagnetic base, offering a full setup for generating carbon dioxide in planted.
- Precision Valve Adjustment: Equipped with a fine-tuning valve that allows controlled and steady regulation of , sudden pressure spikes when setting up the reactor for your underwater.
- DIY Reactor Operation: Designed to work with common household ingredients like citric and baking soda, using two standard 2-liter carbonated beverage bottles as chambers for sustained production.
- Durable ABS Construction: The main unit is built from sturdy ABS plastic, assembled with a check valve mechanism to directional and maintain consistent pressure within the tubing system.
- Secure Ferromagnetic Mount: A base keeps the generator firmly attached to the aquarium cabinet or glass , providing a stable and organized placement away from curious pets and active living spaces.
Description:
CO2 plays an indispensable role to the photosynthesis of aquatic plants, but the aquarium can not provide a genuine environment for plants' growing, so it comes even important for adding adequate amount of CO2 to the aquarium.Our Estink CO2 DIY kit is easy to operate and designed for low cost planted tank use,to provide your aquarium plants an abundant CO2 environment for better growing.
Specification:
Example of Material Proportion (2L coke bottle, baking soda+citric acid):
Bottle A: 200g citric acid+600ml water (1:3),shake until well mixed
Bottle B: 200g baking soda+800ml water (1:4),shake until well mixed
Installations and Operations:
Turn off needle valve and connect to diffuser, check if any loose parts
Connect A, B parts with bottle A and B
Turn on the needle valve and adjust
Do not screw off the bottle cap directly for decompression or stopping reaction
Emergency Treatment: Turn off needle valve and disconnect the tube from the end for air out.
Package includes:
1 x Pressure gauge
2 x Bottle Caps
1 x Needle Valve
Tubes (6mm outer diameter)
What do you need to prepare for this systems?
below(not included):
2x 2 Litre of Coka Cola plastic bottle
1x 200g of Citric acid or 200ml of vinegar
1x 200g of baking soda
Note:
1.The bottle must be carbonated beverage bottle, do not use pulpy, green tea, mineral water bottles, etc.
2.Trimming valve regulation avoid by sudden big or small, can't suddenly turn up, after immediately shut down again, so as not to cause abnormal pressure to the bottle.
3.Make sure carefully observe the direction of the parts before assembly. The usual wrong handle way will cause abnormal reaction.
Technical Specifications
You might also like
Fluval 88g-CO2 Bubble Counter - 3.1 Ounces
STARSIDE Aquarium CO2 Regulator,U Shape Aquarium CO2 Diffuser Check Glass Tube Suction Cup
Glass Co2 Drop Checker with 4dkh/PH Solution | Quickest, Most Accurate & Easiest to Use | NilocG Aquatics | Glass Co2 Drop Checker with 4dKH/Ph Reagent Most Accurate Monitoring of Your Co2 Levels
JARDLI Pollen Glass CO2 Diffuser with Bubble Counter for Aquarium Planted Tank
Milliard Citric Acid 5 Pound - 100% Pure Food Grade NON-GMO Project VERIFIED (5 Pound)
Fluval Ceramic 88g-CO2 Diffuser - 3.1 Ounces
JARDLI Glass CO2 Regulator Bubble Counter with Air Check Valve for Live Aquarium Plant Aquascaping
AQUATEK CO2-Proof Tubing 16 Feet
Bluecell Aquarium CO2 Regulator U Shape Aquarium CO2 Diffuser Check Glass Tube Suction Cup
Pollen Glass CO2 Diffuser with U-Shape Connecting Tube for Aquarium Planted Tank (20 - 50 US gallons)