CoverTec StrongSeal Wetlook Paver Sealer | Joint Sand Stabilizer 5 Gal Kit
Product Description
CoverTec StrongSeal Wetlook Paver Sealer | Joint Sand Stabilizer 5 Gal Kit
- Wetlook Paver Sealer Joint-Sand Stabilizer for Brick Pavers, Concrete, Natural Stone sealer
- Wet look non yellowing sealer, Highly water repellant, Beautifies and protects faded pavers. Repels, oil, grease and rust stains. Resistant to hot tire pickup, VOC compliant
- Abrasion resistant, makes surface easier to clean.
- Typical Uses: Interlocking concrete pavers, New and old concrete. Colored and stamp concrete Unglazed ceramic tiles – Saltillo Paving stones, Masonry brick, Natural stone
- Theoretical Coverage: Porous surface 150 – 200 ft²/gal (3.7- 4.9 m²/l) Dense surface 250 – 300 ft²/gal (6.0 -7.4 m²/l)
StrongSeal Wetlook is a damp tolerant two part polyurethane water dispersed paver sealer and joint stabilizer. When applied to pavers and concrete the product will produce a hard wearing wet look surface that provides protection against stains and exceptional water resistance. In addition its properties bond and lock down the sand between paving joints. CONCENTRATE! 5 GALS DILUTED WITH 5 GALS WATER =10 GALS OF PROFESSIONAL GRADE WETLOOK SEALER Water Based Urethane Wet Look Paver Sealer and Joint-Sand Stabilizer Application: Pump-up Spray, Roller, Brush Coverage: 150-200 sq.ft/gal/coat Dry Time: 45 mins Dry time: Light Traffic 3 hrs Heavy traffic 24 hrs Surface: Brick Pavers, Concrete, Natural Stone Exposure Conditions: Moderate to Severe Finish: Gloss Wet Look Base: Water Base, Zero odor.







