Cabinet Hinges 2PCS, Soft Close Hydraulic Concealed Hinge for Kitchen Cabinets, 90° Opening 4 Inch Cabinet Door Hinge

Cabinet Hinges 2PCS, Soft Close Hydraulic Concealed Hinge for Kitchen Cabinets, 90° Opening 4 Inch Cabinet Door Hinge

• Product Note: These cabinet hinges open 90 degrees and close to 180 degrees, and are suited for frame cabinets (frame length greater than 2.8 inches, as shown in the third main picture); they do not fit lazy susan cabinets, blind corner frameless cabinets, or bifold doors. Door panel thickness must be 16–25mm, as thicker panels (>25mm) may prevent proper closure and thinner panels (<16mm) cannot accommodate the required 12mm drill depth—please verify size compatibility before purchase. Thank you.
• Inside the box: You will find 1 pair (2 pieces) of 90-degree hinges and screws, suitable for a door thickness of 0.63in-0.98in, with a load-bearing capacity of 22lb per pair; the hinge is preset to a 180-degree closed position upon arrival, so please carefully verify the product size against the second picture in the main image.
• Soft-Closing: Our self-closing cabinet hinges automatically close the door when opened less than 15 degrees, have passed 50,000-cycle performance testing, and help extend the lifetime of the doors, cabinets, and hinges.
• 3D Adjustment: You can adjust the hinge up and down, left and right, and front and back, moving the door panel up to 2mm by adjusting the screws.
• Removable Design & Easy Installation: The hinge base can be removed by unscrewing the adjusting screws, making it easier to repaint cabinets, clean blind areas, and install compared to non-removable designs.