CNBTR Oxygen Rotameter | Flow Range: 0-5 LPM | with Flow-Control Knob
Product Description
CNBTR Oxygen Rotameter | Flow Range: 0-5 LPM | with Flow-Control Knob
- OXYGEN FLOW RATE: As oxygen flows through, it pushes an indicator up the scale, showing you the flow rate.
- VERTICAL INSTALLATION: Mount this flow meter vertically inline with your oxygen system, so oxygen flows up from the bottom.
- FLOW-CONTROL KNOB: The flow-control knob lets you open and close the valve at the inlet to regulate the flow rate within the range.
- BACK FITTING STYLE: Fittings on the back let you install these flowmeters in instrument panels. Mount them vertically inline with your piping system, so that to avoid the tube tangles and a clean and sleek flowmeter for oxygen.
- OTHER GAS MEASUREMENT: This flowmeter is calibrated with oxygen but can be used with other gases. If you’re using these with a gas other than oxygen, you’ll need to calculate the flow rate by multiplying the number shown on the scale by the specific-gravity conversion factor for the gas.
- GAS COMPATIBILITY NOTICE: Gas compatibility must be determined by the customer based on the conditions in which the product is being used, including the presence of other chemicals, temperature, and consistency.
Note: The color of the item may vary slightly due to photography and your own computer
Features:
Product function: to measure gas single-phase non-pulsating flow
Widely used for measuring and controlling the flow of oxygen
Beautiful look,low weight,unbreakable and long life span.
Applies to: Mainly used to detect oxygen flow, control the flow of oxygen, the gas flow can be detected.
If you are not familiar with the product information, you can contact customer service before purchasing.
Specification:
Material: Acrylic + plastic + metal
Color: Multicolor
Village ruler Specifications: 65 x 22 x 90 mm / 2.56 x 0.87 x 3.54" (WxTxH)
Connection: 8MM pagoda (hose connection)
Center distance: 65.5mm
Applicable medium: Gas
Accuracy: 5%
Flow range: 0-5LPM
Working pressure: ≤0.6Mpa
Operating temperature: 0-60 ° C
Total weight: 74 g
Package include:
1 x LZQ-3 Oxygen Flow Meter
Technical Specifications
You might also like
CNBTR LZQ-3 0-10 LPM Tube Type Acylic Flowmeter Gas 8mm Hose Fitting Oxygen Flowmeter Regulator Flow Meter
DERNORD Tri Clamp in-Line Sight Glass with Flow Sanitary Straight Sight Glass SUS316 1.5 Inch Tri Clamp Clover Type (Flow Pipe OD 38MM)
FERRODAY Sanitary Air Filter 4Pcs Water Fittings for Beer Brew Keg and Homebrew (4pcs of Pack)
DERNORD 1-1/2" Tube OD Sanitary Ferrule Elbow 90 Degree Pipe Fitting SUS304 Tri Clamp 1.5 Inch
Anderson Metals 57001-0404 Brass Hose Fitting, Adapter, 1/4" Barb x 1/4" NPT Male Pipe
ABS LZM-6 100-1000ml/min Oxygen Air Gas Flowmeter with Control Valve for Oxygen Adjustable
ATP Vinyl-Flex PVC Food Grade Plastic Tubing, Clear, 1/4" ID x 3/8" OD, 100 feet Length
Winters PEM Series Steel Dual Scale Economy Pressure Gauge, 0-15 psi/kpa, 2" Dial Display, +/-3-2-3% Accuracy, 1/4" NPT Bottom Mount
Dixon OA61 Oxygen Hose Brass Fitting, Coupler, 9/16"-18 UNF Right Hand Female, 1/4" Hose ID Barbed