CHANCS DC Electric Motor 895 DC 12V/24V 6000RPM 12000RPM Electric Power Tool Sawing Machine

CHANCS DC Electric Motor 895 DC 12V/24V 6000RPM 12000RPM Electric Power Tool Sawing Machine

• *Attention: 1.The set can use adjustable speed power supply, or switching power supply. 2.Always disconnect the power when wiring. 3.When installing, please tighten the saw blade and screws so that the saw blade will not fly out and hurt people when the motor starts.
• Application: Hand tools,garden tools, power tools,shredder, sprayer, small cutting machine, small table saw for cutting/polishing.
• *Specifications of motor: Rated voltage: DC 24V; No-Load Speed: 12000RPM; Torque:≤10Kgf.cm; No-load current: 0.5A; Power：150W; Shaft Diameter: 5mm; Shaft length: 16mm; Length：72mm; Width: 48mm; Mounting hole distance: 29mm(M4 screws)/32mm(M5 screws);
• *Slider Size： Total length: 159mm(6.26")； Mounting holes for M5 screws； M10 bush is suitable for saw blade with inner diameter 16mm（0.63"）, outer diameter 110mm(4.33"), common with angle grinder. B12 drill chuck clamping range is 1.5-10mm(0.06"-0.39").
• *Belt Pulley Size: Large pulley: 48 teeth, inner diameter 12 mm(0.47"); Small pulley: 16 teeth, inner diameter 5 mm(0.2"); Timing belt circumference: 240mm(9.45").