BuildPro Inserta Clamp, Clamp Capacity: 8-1/2", UEN5200, Build Pro

BuildPro Inserta Clamp, Clamp Capacity: 8-1/2", UEN5200, Build Pro

• Fits 5/8 in. Table Holes: Drops directly into the 5/8 in. (16 mm) holes on BuildPro tabletops and clamping squares for fast setup. Clamp in the vertical or horizontal position at any height.
• 8-1/2 in. Capacity, 400 lb Pressure: Clamps up to 8-1/2 in. (215.9 mm) with 400 lb (181.4 kg) of clamping pressure and a 4 in. (101.6 mm) throat depth for larger parts and assemblies.
• T-Handle and 25/32 x 3/8 in. Rail: The T-handle gives a firm grip and good leverage when tightening. The rail measures 25/32 x 3/8 in. (19.8 x 9.5 mm) and the clamp weighs 2.2 lb (1.00 kg).
• Dual-Force Clamping: Depress the spring stop to remove the clamp arm and slide on the optional Sidekick attachment for two-point horizontal and vertical clamping force at the same time.
• Round and Angled Stock: Clip the optional Top V-Pads onto the top spindle to secure round or angled material. The replacement pad for this clamp is part number XFP.