BlueDex Blind Spot Monitoring 12V 24GHz BSD Lane Change Warning Kit

BlueDex Blind Spot Monitoring 12V 24GHz BSD Lane Change Warning Kit

• Universal Fit for Most 12V Vehicles-Designed for sedans, SUVs, and pickup trucks with DC 12V power systems. Professional installation is recommended. Includes an installation manual and radar angle alignment tool for accurate setup and optimal detection performance
• 24GHz Millimeter Wave Radar Detection-Built-in dual 24GHz millimeter wave radar sensors provide stable blind spot monitoring with a detection range of 1–32.8 ft (0.3–10 m). When a moving vehicle approaches from the side or rear blind zone, the LED warning indicator activates automatically
• Multi-Mode Blind Spot Warning Alerts-The system provides real-time alerts based on driving conditions for safer lane changes: 1.Turn signal OFF – the corresponding LED warning light stays illuminated when a vehicle enters the blind spot zone 2.Turn signal ON – the corresponding LED flashes and the buzzer sounds 3 warning beeps during lane changes 3. Hazard lights ON – the LED flashes continuously and the buzzer sounds 3 times for increased driver awareness
• Professional Installation Required-Radar sensors cannot penetrate metal surfaces. Please read the installation manual carefully before installation. Proper sensor mounting position, angle, height, and wiring are essential for accurate blind spot monitoring performance
• Enhanced Driving Safety in All Conditions-Improves driving awareness by monitoring vehicles approaching from rear and side blind spots. Effective during lane changes and in low-visibility conditions such as nighttime driving, rain, snow, or fog