Biantie La 8mm 2-Pin LED Strip Connector, Solderless Reusable Clip, 10-Pack
Product Description
Biantie La 8mm 2-Pin LED Strip Connector, Solderless Reusable Clip, 10-Pack
- Reusable Clip Without Ruining Your Strip: Most solderless clip connectors pierce the copper pad on contact, so a wrong-side-up or reverse-polarity clip usually means cutting that section away and rejoining with a fresh piece of strip. This flip-latch design clamps with even, controlled pressure instead of piercing — if you clip it in wrong, just lift the white latch, flip the strip, and reconnect the same section instead of cutting it out
- Indoor Cabinet, Closet, and Vanity Installs: Clips onto 8mm LED tape inside kitchen cabinets, under bathroom vanities, along bookshelf edges, or behind TV panels without a soldering iron or screwdriver. Rated IP20 for dry indoor locations; a flame-retardant polycarbonate housing surrounds the contacts
- Works with IP65 Silicone-Coated Strips: For waterproof 8mm tape, peel back the silicone coating over the two copper pads with a fingernail or plastic tool before inserting; non-waterproof strips insert directly with no prep step needed
- Pairs with 8mm Single-Color Tape and a DC Power Adapter: Each connector links 3528 or 2835 tape to a 12V or 24V DC power source using 22-20 AWG extension wire cut to the run length. This 10-pack covers multiple cabinet runs with spare connectors left over for polarity corrections
- 6A Rating, 5V-24V DC Compatibility : Handles single-color 3528 and 2835 LED tape rated up to 6A across the 5V-24V DC range. The wire slot fits 22-20 AWG solid or stranded two-conductor cable, so existing extension wire on hand will usually work. Not compatible with RGB, 4-pin, 5-pin, or 10mm-wide strips
DIY Strip to Wire Quick Connection
Updated version of LED strip connectors, assemble wire by yourself as needed, flexible to different project! No need to solder. Just clasp your prepared led strip section into the connector to get connected. compatible with 30-120 LEDs/M strip, made of flame retardant material, safely use. Support high current LED strip lights.
Suitable for a variety of wire sizes
Stripping-free connectors usually have strict requirements on the wires, such as the standard wire 20 awg, 18 gauge can be well matched, and it is difficult to open again after closing.
These BL LED strip connector improves these shortcomings, 24 - 18awg standard or non-standard solid wire, stranded wire and fused wire can be applied. not only can be firmly clamped, but also easy to open and reuse.
Installation Tips:
Strip End:
1.Open the wire clip. It should snap open with just a little effort.
2.Insert your 8mm LED light strip inside the clip underneath the two contact prongs, making sure the + and - symbols align.
3.Snap the wire clip shut. Gently pull on the tape to confirm you've secured the strip inside the connector.
Wire End:
1.Separate 2 wires and stripping
2. Use a fingernail to press the two wires into the slot to clamp them.
3. Snap the wire clip shut. Pull on the wire to confirm you've secured the wires inside the connector.
If you have any problem about installation, pls feel free to contact me.
Package:
10pcs Strip to Wire Connectors (BL20B-8)
Technical Specifications
You might also like
65.6ft Extension Cable Wire Cord JACKYLED 20M 22AWG Wire Cord for Led Strips Single Color 3528 5050
LightingWill 65.6ft/20M Electirc Wire 22 AWG, Extension Cable Wire Cord for LED Strip Light Single Colour 3528 5050
20m(66ft) 20AWG 2Pin Extension Cable Wire Cord Line for Single Color LED Strip Ribbon Lights 3528 5050,2 Wire 20-Gauge Parallel Wire
LED Strip Lights 32.8ft Daylight White, Govee 6500K Dimmable White Light Strip with Control Box, 600 LEDs Super Bright Tape Lights for Mirror, Under Cabinet, Living Room, Study, Wardrobe
QIJIE 3528 LED Strip Connector 8mm 2 Pin for Non-waterproof and Silicon Waterproof (Not PU and Epoxy) Tape Light, Efficient Wire To Board Terminal Splicer,No Wire,10 PCS
CARLITS 20AWG 66ft Extension Cable Wire Cord 20m Stranded Tinned Copper for Led Strips Single Color 3528 5050 2835
60W Dimmable Driver Quiet Operation Universal Regulated 12V DC SCR Power Supply Adapter Low Voltage LED Power Supply Input/Output Isolation Protection Transformer for Constant LED Products
65.6ft/20M Electric Wire 22 Gauge, AWSOM Extension Wire Red Black 2 Wire Stranded Tinned Copper for 3528 LED Strip Lights, 12V DC Wire, Speaker, Doorbell Wire …
LEDMO LED Strip Light Non-Waterproof SMD2835 600LEDs 3000K 16.4Ft DC12V 15LM/LED 3 Times Brightness Than SMD 3528 LED Light Strip LED Ribbon for Kicthen Bedroom and Sitting Room Warm White