Biantie La 2-Pin 8mm LED Strip Connector, Solderless Hand-Press Clip

Biantie La 2-Pin 8mm LED Strip Connector, Solderless Hand-Press Clip

• Hand-Press Wire Connection: Strip the wire end, insert it into the open clip, then press the clear cover closed by hand; no pliers or crimping tool are needed to complete the connection
• Fits 8mm COB and SMD 2835 Single-Color Strips: Designed for 2-pin 8mm strips with exposed copper pads, compatible with 5V, 12V, or 24V DC. For IP65 silicone-coated strips, peel back roughly 6mm of coating before inserting
• Corner Turns, Gaps, and Custom-Length Runs: Two connectors with matching wire route a strip around a corner, bridge a gap, or extend a cut section to a custom length. A single connector links one strip end to wire; two connectors create a jumper between strip sections
• Reusable, Openable Design: Each pack includes 10 wire-to-strip connectors for solid or multi-strand 22 AWG two-conductor wire, stripped before insertion; the cover reopens by hand for rewiring. Does not fit 10mm strips, RGB or RGBW strips, or wire outside 22 AWG
• Clear Housing for Polarity Check: The transparent shell lets you check pad alignment and (+/−) orientation before closing the clip; tin-plated copper contacts complete the wire-to-strip connection once the cover is pressed shut