Babylock â€Cover/Chain (Standard Flat Sole)" Stitch Exclusive Foot for Serger Machine
Product Description
Babylock â€Cover/Chain (Standard Flat Sole)" Stitch Exclusive Foot for Serger Machine
- Babylock ”Cover/Chain (Standard Flat Sole)" Stitch Exclusive Foot for Serger Machine. This is Standard Flat Sole Foot. "Cover/Chain Stitch Foot" for Evolution(BLE8W-2), Ovation(BLES8), Evolve(BLE8W) Exclusive for Serger Machine
- Stitch: Left, right or center chain stitch, narrow, wide or triple cover stitch. (Select one and check with instruction book for length and width setting for specific stitch selection.)
- Stitch Length: 3 to 4. Ribbon or tape: up to 8mm wide
- This products is the pure regular items Babylock company is selling! Genuine Products of Babylock.
Use the Cover/Chain Stitch foot for better visibility and easier control for stitching curves or turning tight corners and attaching tape and ribbons.
-Instructions-
1. Snap on the Chain/Cover Stitch foot and set up the machine for the stitch you desire.
2. Raise the presser foot.
3. Place fabric under the foot.
4. If using the ribbon or tape slot in the front of the foot, insert ribbon into the slot and under the foot.
5. Lower the presser foot.
6. Turn the handwheel toward you to form 2 or 3 stitches.
7. Start to sew slowly.
8. After the first few stitches, stop and cut excess threads.
9. Start the next seam at the toe of the presser foot.
10. Test sew sample for desired effect. Be careful not to push or pull the fabric.
The serger will feed it evenly without help.
--Please be careful--
Of course, this is genuine authentic product and the manufacturer provides its parts of this item alone.
Therefore please note that package for regular consumers and instruction do not come with it.
The reason I put this description is there are some buyers who have asked me whether "this is authentic" or others who return it.
It comes with plain package but please rest assured that the product is real genuine products for sure.
Thanks.








