3-Piece Expandable Rubber Curb Ramps for Driveway

The Bridjit expandable 3-piece rubber curb ramp protects the undercarriage of vehicles from damage when driving over rolled curb driveway entries. Rubber from recycled tires makes this curb ramp resistant to weather and street sweepers, and allows parallel-parking. The 3-piece/12-foot set includes a left-side, center, and right-side section for installation on both curved and straight driveway entries. Additional 48-inch wide center sections (sold separately) can be purchased to increase coverage beyond 12 feet. Galvanized bolts measure 1/2 x 7-1/2-inch and are pre-inserted into the center section to connect the three sections. Each section weighs 50 pounds and measures 2-1/2 x 48 x 16 inches (H x W x D). (H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.) The 2-1/2" height at the center tapers to 3/4-inch at the top and bottom of the ramp. A 2-1/2-inch wide channel on the underside of each section allows water to flow under the ramp, accommodating storm runoff and tapered ends help prevent the buildup of debris. Bridjit Curb Ramps are placed in the gutter of a rolled curb driveway entry to create a gradual slope between the top of the curb and street. Bridjit Curb Ramps are designed to reduce the impact of a rolled curb entry by as much as 80% and can be used for protect the undercarriage of all types of vehicles, such as cars, trucks, golf carts, motorcycles, boat trailers and can be used to facilitate the movement of wheeled carts and hand trucks. Curb ramps are commonly made of rubber, plastic, or metal. They may consist of a single piece or multiple interconnecting pieces, and may be portable or permanently installed. Bridjit Inc. manufactures curb ramps. The company, founded in 2008, is headquartered in Kent, WA.