BP Resins: Single Shot |100% Solids Epoxy Resin Kit (3 Gallons) Solvent-Less, Two Component Gloss Coat Finish- Low VOC! Industrial Use, Garages, Floors & More! (White) + Free Mixer!

BP Resins: Single Shot |100% Solids Epoxy Resin Kit (3 Gallons) Solvent-Less, Two Component Gloss Coat Finish- Low VOC! Industrial Use, Garages, Floors & More! (White) + Free Mixer!

• Professional-Grade 100% Solids Epoxy: Single Shot is a two-component, high-build epoxy coating designed for concrete floors, garages, workshops, basements, residential spaces, commercial floors, and industrial use. Delivers a durable high-gloss finish when installed over properly prepared surfaces.
• Professional-Grade 100% Solids Epoxy: Single Shot is a two-component, high-build epoxy coating designed for concrete floors, garages, workshops, basements, residential spaces, commercial floors, and industrial use. Delivers a durable high-gloss finish when installed over properly prepared surfaces.
• Working Time Matters: Once Part A and Part B are mixed, pour the material onto the floor immediately. Do not leave mixed epoxy sitting in the bucket. Mixed epoxy left in mass can heat up and cure quickly. Beginners should mix smaller batches.
• Prep, Mix, and Apply Correctly: For best results, concrete must be clean, dry, and mechanically profiled. Premix Part A before adding Part B, mix at low speed, scrape sides and bottom while mixing, and avoid scraping the container while pouring. Improper prep or mixing can cause tacky spots, bubbles, or uneven cure.
• Read Before Mixing: Printed quick-start instructions are included with every kit. Single Shot can be used as a stand-alone coating, but if moisture is a concern, an MVB base coat is recommended. For extended longevity, UV resistance, and added wear protection, a compatible topcoat is recommended.
• Includes a FREE mixer!