BALL LOCK TAPPING HEAD TO 2INCH TRI-CLOVER (COMMERCIAL KEG ADAPTOR)

BALL LOCK TAPPING HEAD TO 2INCH TRI-CLOVER (COMMERCIAL KEG ADAPTOR)

• Most commercial kegs will use a traditional type keg spear like d-type keg spear(American Sankey) or the a-type keg spear(German Slider). These keg spears have been designed for commercial use and will use larger and high flow rate commercial keg.
• With that said some customers like the ability to use these commercial kegs but would prefer to have ball lock posts on the keg as the fittings are more compact and less expensive. For this reason we now manufactre this unique fitting which enables the spear to be removed from the commercial kegs and then fitted with this sanitary 2inch tri-clover adaptor. This is the most economical way to use the commercial kegs with ball lock posts.
• This lid comes with beer post, gas post, pressure relief valve, just attach the silionce hose to the end of the beer post, then it works the same as a cornelius ball lock keg.
• Also this lid is ideally suited to also fermenting under pressure so you can use a spunding valve so you can naturally carbonate during primary fermentaion.
• The max pressure: 2.5 bar (36 psi) Please depressurize before removing lid.