Automatic Vacuum Switch for Power Tool & Table Saw – Load Sensing Remote Control Outlet with 2 Outlets: Tool Plugs into One, Dust Collector Auto-On/Off When Tool Runs (1s Delay On / 7s Delay Off)

Automatic Vacuum Switch for Power Tool & Table Saw – Load Sensing Remote Control Outlet with 2 Outlets: Tool Plugs into One, Dust Collector Auto-On/Off When Tool Runs (1s Delay On / 7s Delay Off)

• "TOOL" is an instant power on/off outlet,"VAC" is a load sensing switch: This is a tool-activated vacuum switch, not a standard outlet. The VAC socket stays off by default and only powers on when the TOOL socket is running and reaches 30W. A device plugged into the VAC socket alone will not work.
• Auto Vacuum Start: When the tool socket is activated and reaches the 30W threshold, the vacuum socket powers on automatically and starts the vacuum within 1 second. This delay helps prevent circuit overload or tripping caused by both devices starting at the same time.
• Press "ON/OFF" button to turn the switch on and off ; or stop the dust collector by remote.Save your time and improve work efficiency.
• The "VAC-AUTO" button on remote is "7s OFF Delay " function: Once we stop the tool such as table saw,vacuum will continue clearing debris for 7 seconds,then shut off automatically.
• Ideal for vacuum cleaner,track saw,miter saws, table saws, power sanders, routers, fine woodworking, planers etc. The dust collector motor maximum rated power should not exceed 120V/15A, 1800W.
• Extended Range Remote Control: Attached two remotes including battery inside with 328ft (100 meters) working distance for convenient operation
• Durable Construction: Well built design featuring sturdy ABS shell with V0-grade flame retardant materials and UL-certified SJT 14AWG US standard power cord
• Safety Default OFF Mode: When there is a power failure and return, this switch will keep power off to ensure that the tool will not start automatically
• Press "SET" button to add more remotes: long press the "SET" button till green light on,release, and press new remote's ON button, hold it for 1 second, LED blinking,pairing completed.
• 1-year warranty. If you have any questions or need basic setup assistance, please contact us through Amazon.