Arrow Grey Concrete Anchor (Clips and Shields)

Arrow is the world’s leading maker of storage buildings and made in the USA. When using a concrete slab as a base for your Arrow shed or storage building, consider the AK100 Concrete Anchor Kit to help anchor the outdoor shed to the slab or foundation. This anchor kit is intended for use on all Arrow storage buildings. With this kit, your Arrow shed will get the protection needed against strong winds. The Arrow Shed Concrete Anchor Kit is a smart and easy way to secure your Arrow storage structure to a concrete pad.

The concrete Anchor Kit comes complete with all required parts and easy to follow instructions. For proper installation, it is important that the overall size of the patio/slab has approximately 9/16" (1,4 cm) clearance between frame and edge of concrete around entire perimeter.

This handy anchor kit includes:

•(4) steel corner gussets
•(11) hold down perimeter clips
•(16) Anchor bolts
•(39) #10 x ½ inch (13mm) Screws
•(1) 1/4 inch masonry drill bit

Before you begin your DIY project, it’s important to have the following tools for fast and easy assembly:

•Carpenter's Level
•1/4" Masonary Drill Bit(included in kit)
•Drill (Electric)
•#2 Phillips Head Screwdriver
•Safety Glasses
•Tape Measure
•1/8" (3,2 mm) Drill Bit
•3/8" Wrench
•1/4" (6,4 mm) Drill Bit
•Hammer
•Work gloves & long sleeves

1 Anchor Kit is recommended for most buildings. Anchors are used at each corner and spaced evenly along the floor frame (sold separately). In just 3 steps, your outdoor storage shed is firmly secured to the concrete foundation:

1) Corner Gusset Installation
2) Hold Down Clip Installation
3) Front Frame Anchor Installation