Argon Co2 Regulator, Welding Argon Gas Regulator for TIG and MIG, Dual Gauge Co2 Regulators with 6.6FT Welding Gas Hose, CGA580 Inlet Connection, 0-4000PSI Input Pressure

Argon Co2 Regulator, Welding Argon Gas Regulator for TIG and MIG, Dual Gauge Co2 Regulators with 6.6FT Welding Gas Hose, CGA580 Inlet Connection, 0-4000PSI Input Pressure

• CGA580 Inlet Connection: Welding gas regulators connects easily to argon and Co2 tanks, note that a CGA-320 adapter is required for use with Co2 cylinders. This product comes standard with the CGA-580 connector only
• Correct Usage: Do not attach the T-wrench before using the argon regulator. step 1：connect the welding regulators to the gas cylinder. then open the valve, install the t-handle and slowly turn the T-wrench to the right to adjust to the desired gas pressure
• Precision Filtration: CGA-580 inlet is equipped with a filtration structure, which can block the impurities and particles in the gas tank from entering into the instrumentation system, ensuring the purity of the gas and enhancing the welding quality
• Multi-Connection Design : This brass welding gauge regulator is available with three connection options: a 9/16" external thread, a 5/8" internal thread and a standard 1/4" hose barb
• Specifications: Highly accurate dual gauge CGA580 regulator display is easy to read and accurate, Inlet pressure range: 0-4000 PSI, Argon output pressure range: 0-30 CFH, CO2 output pressure range: 0-20 CFH