Archer Watch Straps - Stainless Steel Watch Strap Buckles (Brushed Stainless, 24mm)
Product Description
Archer Watch Straps - Stainless Steel Watch Strap Buckles (Brushed Stainless, 24mm)
- Exceptional Durability – Made from corrosion-resistant stainless steel and coated with a vacuum PVD finish, our watch band buckles will not crack, chip, or rust.
- Variety, Refined – Complement your watch perfectly with five sleek and subtle tones—black, gunmetal, stainless steel, gold, and rose gold—and three handsome finishes—polished, brushed, and matte.
- Total Compatibility – Our buckles come in eight common sizes to fit almost any watch band, Archer or otherwise. Some straps are tapered so the correct buckle size may be different than your strap width.
- Two Tongue Widths – Each buckle comes with both 2mm and 3mm-wide tongues, to accommodate smaller or larger watch strap holes.
- Simple Set Up – To install the buckle, grab a pin, paperclip, or a spring bar tool and release the spring bar through the holes on the sides of the buckle. Then, just slot the spring bar into the holes on your strap and reattach the buckle.
Technical Specifications
You might also like
Coavoo 2Pcs T8 8mm T8 x 14 Tr8 x 14 Lead Screw 45inch /1143mm Length with Brass Nuts (Acme Thread, Pitch of Screws: 2mm, Lead: 14mm, 7 Starts) Used in 3D Printer Z Axis
Coavoo 2Pcs T8 8mmT8 x 3 Tr8 x 3 Lead Screw 40.16inch /1020mm Length with Brass Nuts (Acme Thread, Pitch of Screws: 3mm, Lead: 3mm, Single Start) Used in 3D Printer Z Axis
Coavoo 2Pcs T8 8mm T8 x 14 Tr8 x 14 Lead Screw 39.37inch /1000mm Length with Brass Nuts (Acme Thread, Pitch of Screws: 2mm, Lead: 14mm, 7 Starts) Used in 3D Printer Z Axis
Coavoo 2Pcs T8 8mm T8 x 8 Tr8 x 8 Lead Screw 47.24inch /1200mm Length with Brass Nuts (Acme Thread, Pitch of Screws: 2mm, Lead: 8mm, 4 Starts) Used in 3D Printer Z Axis
Coavoo 2Pcs T8 8mm T8 x 6 Tr8 x 6 Lead Screw 46.46inch /1180mm Length with Brass Nuts (Acme Thread, Pitch of Screws: 2mm, Lead: 6mm, 3 Starts) Used in 3D Printer Z Axis
Coavoo 2Pcs T8 8mm T8 x 4 Tr8 x 4 Lead Screw 25.59inch /650mm Length with Brass Nuts (Acme Thread, Pitch of Screws: 2mm, Lead: 4mm, 2 Starts) Used in 3D Printer Z Axis
Coavoo 2Pcs T8 8mmT8 x 2 Tr8 x 2 Lead Screw 3.94inch /100mm Length with Brass Nuts (Acme Thread, Pitch of Screws: 2mm, Lead: 2mm, Single Start) Used in 3D Printer Z Axis
Coavoo 2Pcs T8 8mm T8 x 8 Tr8 x 8 Lead Screw 14.17inch /360mm Length with Brass Nuts (Acme Thread, Pitch of Screws: 2mm, Lead: 8mm, 4 Starts) Used in 3D Printer Z Axis