Anchor-Man PVC Coated Boat Anchor Chain, 1/4 in x 4 ft, 316 Shackles

Anchor-Man PVC Coated Boat Anchor Chain, 1/4 in x 4 ft, 316 Shackles

• Right for You If You Are Tired of Chain Chewing Up Your Bow Roller - 4 ft of black PVC over every link means no bare metal touches the boat, so the gelcoat stays intact and the chain runs out quietly instead of grinding on the roller all night
• Chain Break Load 5,200 lb, Working Load 1,300 lb - a 4 ft lead of 1/4 in galvanised steel chain weighing 2.8 lb, sealed inside the PVC, with two 316 stainless shackles at the ends where the metal stays exposed and rust would otherwise run onto the deck
• How to Use It - shackle the 4 ft length between your anchor and your rode, anchor end first. The weight of the chain lowers the pull angle so the anchor shank lies parallel to the seabed and digs in, instead of lifting and skipping across it
• Protects Your Rode - the 4 ft of chain takes the abrasion where the rode drags over rock, coral and oyster, so the rope above it does not chafe through at the one point you cannot inspect