Alxum 10Gbps M.2 NVME to SATA Adapter IDE SSD Enclosure for Laptop

Alxum 10Gbps M.2 NVME to SATA Adapter IDE SSD Enclosure for Laptop

• 【3 IN 1 Hard Drive Reader】This adapter adopts the PCIe 3.1a M.2 interface, SATA 3.1, and IDE 100 interface protocols. It supports reading three hard drives simultaneously and can display three disk symbols at the same time. It enables easy data transfer between old and new devices. Whether it's for data access, backup of old devices, or data management and migration, this M.2 SATA IDE hard drive enclosure can handle the tasks perfectly. The LED indicator monitors the device status in real - time, ensuring that users are always in control of the operation.
• 【Alxum M.2 SATA IDE External SSD Enclosure】 Breaking through the limitations of traditional built-in M.2 designs, it offers a threefold upgraded experience. By adopting an advanced heat dissipation architecture, the heat dissipation efficiency is improved by 30%, and the service life of the device is significantly extended. The combination of SATA and IDE dual interfaces enables both ultra-fast data transfer via NVMe and compatibility with the large-capacity storage of traditional hard drives, truly achieving a perfect balance between speed and capacity.
• 【10Gbps High-Speed Transmission】Equipped with a USB 3.1 Gen 2 Type - C interface. It is plug - and - play and does not require the installation of a driver. It automatically enters the sleep mode after 30 seconds of inactivity. It supports the UASP and TRIM protocols, offering an ultra - high transmission rate of up to 10Gbps, allowing you to transfer 4K high - definition movies or large files of several gigabytes within seconds. Moreover, it is backward - compatible with USB 3.1 and USB 3.0.
• 【Wide Compatibility】It supports 2230/2242/2260/2280 PCIE NVME M.2 SSDs (M Key/B&M Key), 2.5/3.5 - inch SATA SSDs, and 3.5 - inch IDE hard drives. The Type - C interface is compatible with devices such as laptops, desktops, tablets, and smartphones (it is recommended to use the exFAT/FAT/FAT32 format for smartphones).
• 【Package Content】1×USB-C to M.2/SATA/IDE adapter, 1× USB Type-C to Type-C cable,1×4-pin IDE hard disk power cable, 1×12V 2A power cable. Note:1. this SSD enclosure does not support cloning operations. 2.An external power supply is required to connect a 3.5-inch SATA hard disk.3. The SATA interface and M.2 interface only support hard drive devices (neither supports optical drive devices).