Air Intake Hose Nissan X-Trail 2.2L 2.75 inch 70 mm up to 3 inch 80 mm OD UNIVERSAL FIT

Air Intake Hose Nissan X-Trail 2.2L 2.75 inch 70 mm up to 3 inch 80 mm OD UNIVERSAL FIT

Product ID: B00AGDPZ3S Condition: New

Sold Out

Product Description

Air Intake Hose Nissan X-Trail 2.2L 2.75 inch 70 mm up to 3 inch 80 mm OD UNIVERSAL FIT

  • Resists tears and punctures
  • High quality, durable, heat- and oil proof rubber
  • Strong as an OEM part
  • 100% UV protection
  • Reduces noise level and vibration

UNIVERSAL INSTALLATION * FOR NON-FACTORY INTAKES * SKILL, ADDITIONAL PARTS & INTAKE TRANSFORMATION REQUIRED * Internal diameter x length: 2 3/4" x 6 5/8" / 70 mm x 170 mm * Air intake hump bellows connect between your air filter and the throttle body or other part of the intake duct. A quality air intake hose might be essential in case of intake transformation, modification or when installing a high flow air filter. If you are in the market for a high quality air intake hose hump bellow, you just have found it. If you are suffering from the weak performance and poor fuel economy resulted by a worn, dried out or cracked air intake bellow don't hesitate to replace it by a Magnum air intake hose. Magnum's wide selection of air intake hoses is recommended to numerous high-flow intake projects. Our air intake hoses feature durability, full flexibility and 100% UV protection. This rubber hump bellow does not replace the factory OEM air intake hose unless dimensions identical. The air intake hose should not be exposed to constant oil pollution or smooth. * This hump bellow fits to countless tune-up projects committed on the air intake. * Strong as an OEM part * Exactly the same as pictured above * 60 Sh rubber raw-material provides awesome corrugation * Flanges can be stretched by up to 20 % in diameter. Magnum hump bellows will not harden from exposure to extreme operating temperatures, age or weather. INSTALLATION NOTES * Tighten it with air filter clamp * Intake transformation or additional parts might be required * This rubber hump bellow does not replace the factory OEM air intake hose unless dimensions identical. * The air intake hose should not be exposed to constant oil pollution or smooth. INTENDED USE: cold intake installation * Magnum Tuning has been dealing with manufacture of upgrades since 1994. Magnum' experience in rubber compression molding warrants peak quality and reliability. Magnum Intakes are made in Europe & covered by WARRANTY.

Technical Specifications

Country
USA
Brand
Magnum Tuning
Label
Magnum Tuning
Manufacturer
Magnum Tuning
MPN
UNTBE70-2223
NumberOfItems
1
PartNumber
UNTBE70-2223
Publisher
Magnum Tuning
Studio
Magnum Tuning