NEMA-17 Stepper Motor - 200 Steps, 12V 350mA by Adafruit
Product Description
NEMA-17 Stepper Motor - 200 Steps, 12V 350mA by Adafruit
- 200 steps per revolution, 1.8° per step
- Coil configuration: Red & Yellow (Coil 1), Green & Brown/Gray (Coil 2)
- Bipolar stepper motor, needs 2 full H-bridges
- 4-wire, 8-inch leads
- Body dimensions: 42mm/1.65" square
- Mounting: 31mm/1.22" square holes, 3mm metric screws (M3)
- Drive shaft: 5mm diameter, 24mm long with machined flat
- Voltage: 12V rated (torque drops at lower voltages) at 350mA max current
- Holding torque: 28 oz*in, 20 N*cm, 2 Kg*cm per phase
- Winding resistance: 35 ohms
Some nice details include a ready-to-go cable and a machined drive shaft (so you can easily attach stuff). We drove it with an Adafruit motor shield for Arduino and it hummed along nicely at 50 RPM. To connect to our shield, put the wires in this order: Red, Yellow, skip ground, Green, Brown (or Gray)
Technical Specifications
You might also like
Adafruit Motor/Stepper/Servo Shield for Arduino v2.3 Kit
Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit
Adafruit TB6612 1.2A DC/Stepper Motor Driver Breakout Board
Tolako 5v Relay Module for Arduino ARM PIC AVR MCU 5V Indicator Light LED 1 Channel Relay Module Works with Official Arduino Boards
ARDUINO UNO R3 [A000066]
DC Boost Converter, Yeeco 1A DC-DC Step Up Converter Board 2-24V 5V 9V to 5-28V 12V 20V Voltage Regulator Booster Module Adjustable Voltage Step Up Power Supply Module
Stepper Motor Mounting Bracket, 3PCS Alloy Steel L Bracket for Nema 17 Stepper Motor with Screws and Inner Hexagon Spanner
STEPPERONLINE Nema 17 Stepper Motor Bipolar 2A 59Ncm(84oz.in) 48mm Body 4-lead W/ 1m Cable and Connector compatible with 3D Printer/CNC
Arduino Uno R3 Development Board, Kit Microcontroller Based on ATmega328 and ATMEGA16U2 with USB Cable for Arduino, Original(Arduino Uno R3)