Acrylic Platter Upgrade for Pro-Ject Debut/T1/1Xpression, Music Hall MMF-2.1/2.2/2.3/3.3/5.1/5.1se/5.3/5.3se, Angels Horn, and Crosley C6 Turntables (Tinted - Dark Grey)

Acrylic Platter Upgrade for Pro-Ject Debut/T1/1Xpression, Music Hall MMF-2.1/2.2/2.3/3.3/5.1/5.1se/5.3/5.3se, Angels Horn, and Crosley C6 Turntables (Tinted - Dark Grey)

• NOT for Pro-Ject Essential, Project 1.2, Music Hall MMF-1.3/1.5 Turntables, Angels Horn H019/HP-H003 or any other turntable without a sub platter. Be sure that your turntable is listed in the title before getting it as it will likely not work for your turntable otherwise.
• Upgrade your listening experience with an acrylic platter. An acrylic platter decreases wow & flutter effects due to its higher mass which increases rotational inertia.
• Acrylic provides a cleaner and more detailed sound by minimizing unwanted vibrations as a result of its high density and low stiffness.
• It is recommended that you place records directly on the acrylic platter with no mat to take full advantage of the properties of acrylic.
• Dimensions: Diameter: 11.8 inches (300mm), Thickness: 0.71 inches (18mm), Weight: 2lb, 1.3oz (926 grams), Diameter of center hole: 0.29 inches (7.4mm), Diameter of carved out space under platter: 9.65 inches (245mm), Depth of carved out space: 0.39 inches (10mm). There is a large carved out area underneath to leave room for the belt drive system that sits under and inside the edges of the platter. This is not for a turntable where the belt goes around the diameter of the platter.