Acrylic Platter Upgrade for Pro-Ject Debut/T1/1Xpression, Music Hall MMF-2.1/2.2/2.3/3.3/5.1/5.1se/5.3/5.3se, Angels Horn, and Crosley C6 Turntables (Clear)

Acrylic Platter Upgrade for Pro-Ject Debut/T1/1Xpression, Music Hall MMF-2.1/2.2/2.3/3.3/5.1/5.1se/5.3/5.3se, Angels Horn, and Crosley C6 Turntables (Clear)

• NOTE: To avoid warping the platter, the clear platter has not been polished and will have small ripples in the surface from the laser that cut the platter into the appropriate shape. These ripples do not diminish the performance and only have a minor effect on the appearance.
• NOT for Pro-Ject Essential, Project 1.2, Music Hall MMF-1.3/1.5 Turntables, Angels Horn H019/HP-H003 or any other turntable without a sub platter. Be sure that your turntable is listed in the title before getting it as it will likely not work for your turntable otherwise.
• Upgrade your listening experience with an acrylic platter. An acrylic platter decreases wow & flutter effects due to its higher mass which increases rotational inertia.
• Acrylic provides a cleaner and more detailed sound by minimizing unwanted vibrations as a result of its high density and low stiffness. It is recommended that you place records directly on the acrylic platter with no mat to take full advantage of the properties of acrylic.
• Dimensions: Diameter: 11.8 inches (300mm), Thickness: 0.71 inches (18mm), Weight: 2lb, 1.3oz (946 grams), Diameter of center hole: 0.29 inches (7.4mm), Diameter of carved out space under platter: 9.65 inches (245mm), Depth of carved out space: 0.39 inches (10mm). There is a large carved out area underneath to leave room for the belt drive system that sits under and inside the edges of the platter. This is not for a turntable where the belt goes around the diameter of the platter.