AUTOOL Battery Load Tester CCA 100-2400 Bad Cell Test for Regular Flooded, Auto Cranking and Charging System Diagnostic Analyzer for Domestic Cars, Boats

Bulletpoint:
1. Simple and easy to use
2. Test batteries on and off the vehicle
3. Accurate results in milliseconds
4. Battery Life Analysis
5. Analysis Result: Good or Replace
6. Large easy to read LCD display
7. Test results based on JIS, EN, DIN, SAE and IEC Standards
8. Languages: English, Russian, Spanish, French, German
9. Quick test-input battery volume (AH), then it can show the battery status
10.Vehicle cranking system test-cranking time, voltage and status
11.Vehicle charging system test-load voltage, unloaded voltage, ripple status and charging system status
12.Store the testing result

Features:
1. Conductance correlates directly to the battery capacity
2. Passive testing method is safe
3. Never discharges or drain the battery
4. Able to test condition of discharged battery
5. Consistent and repeatable results
6. Provides unique indication of battery conditions
7. Provides check the Alternator's charging and Starter's cranking conditions. It is maintenance free and no internal batteries required
8. Powers up when connected to the battery posts during testing

Test Results:
1. Battery Test Result: (1) Good Battery; (2) Good, Recharge; (3) Replace; (4) Bad Cell, Replace; (5) Charge, Retest
2. Cranking Test Result: (1) Low; (2) Normal
3. Charging Test Result: (1) Normal; (2) Low; (3) High

Application:
Use to test a wide range of 12V batteries (Starting [SLI], Deep Cycled and Marine) of Wet (Flooded), VRLA or Maintenance Free (MF), Sealed Maintenance Free (SMF), Absorption Glass Mat (AGM) and GEL cell. The major battery standards JIS, SAE, EN, DIN and IEC are supported.

Package Includes:
1 * AUTOOL Auto Battery System Tester
1 * User Manual