AUGOCOM® CATV Cable Tester, Coax Cable Tracer Coaxial Wire Continuity Checker, TV Handle Signal Level Meter DB Tester 47-870 MHz
Product Description
AUGOCOM® CATV Cable Tester, Coax Cable Tracer Coaxial Wire Continuity Checker, TV Handle Signal Level Meter DB Tester 47-870 MHz
- Multi-Function TV Signal Meter: RY S110 CATV Cable TV Handle Signal Level Meter is an instrument used for the construction and maintenance of analog TV / digital TV, and the measurement of TV signal level and power level. It is widely applied in the routine maintenance of the CATV system; slope measurement,voltage measurement,measurement of C/N ratio.
- How to switch the meters Channel to US Channel: Enter VOLT and then press ./Z button, and the right corner please switch to 2ch, then you entered US channel.
- Liquid Crystal Display: High brightness backlight working mode, digital clear display.
- Wide Test Range: U.S. Standard Channel USA STD-CATV/U.S. digital standard channels USA STD-CATV ,Range of frequency: S110 47MHz ~ 870 MHz.
- Worth to Own: S110 employs high brightness back-light operating modes, with clear LCD screens, dual-channel measurement display, so it is convenient and pragmatic; besides, numeric keypad input allows it easy to operate.
Great News! Standard F type Barrel has arrived! Now buy one pc S110 TV Signal Meter can get Standard F Type Barrel for free! Please use the "add both to cart" button in the promotion session under the product description!!!
Frequency / channel
Frequency accuracy: ± 50 * 10E-6 (20 ℃ ± 5 ℃)
Resolution: 50KHz
Measurement bandwidth: 280KHz ± 50KHz
Level measurement
Measuring range: 30dBuV ~ 120 dBuV
Measurement accuracy: ± 2dB (20 ℃ ± 5 ℃)
Resolution: 0.5dB
Detection method: peak detection
Input Impedance: 75ω (unbalanced, F-type connector)
Carrier-to-noise ratio measurement
Measuring range: 20dB ~ 50 dB
Measurement accuracy: ± 3dB (20 ℃ ± 5 ℃)
Resolution: 0.5dB
Voltage measurement
Input range: 1 ~ 100V (AC / DC)
Measurement accuracy: ± 2V
Resolution: 1V
Operating temperature: 0 ℃ to 40 ℃
Power supply
Battery: 7.4V / 800mAH lithium battery
Working time:> 6 hours (audio / LCD backlight off)
Charging time: ≤ 3 hours
External power supply: INPUT: 100 ~ 240V ~ 800mA 50 ~ 60Hz
OUTPUT: 9V ~ 2000mA
Others
Dimensions: 210mm * 90mm * 48mm
Total Weight: 650g
Audio output: built-in speaker (single-frequency mode manual start)
Package:
1pc x Main unit
1pc x RF input connector
1pc x Power charger
1pc x Manual
Technical Specifications
You might also like
F Type Female to Female Coax RF Connector Barrel 9.3mm to 9.8mm (2pcs)
Jonard SST-716 Security Shield Tool with Black Oxide Finish, For 7/16" Hex Shielded F Connectors
Jonard Industries TTK-225 P Key Tool, Brass
Coax Explorer Plus Tester Klein Tools VDV512-058
Science Purchase 0604LTTV7 7" LTT-7 GTT-7 CATV CABLE Locking Terminator TV Tool
THE CIMPLE CO - Coax Security Key (Security Tool or Shield Adapter) for Coaxial Security Shield and Filter Removal, and Pocket Wrench Tool for Tightening and loosening F81 Connectors
Carebol 7" LTT-7 GTT-7 CATV CABLE Locking Terminator TV Tool 7 Inch blue
SSK-876 Jonard Tools Star Key Can Wrench Kit, LC, LG, LB, & LS Patterns
tesha 7" LTT-7 GTT-7 CATV Cable Locking Terminator TV Tool-7 Inch-Blue
Jonard M-216C/EX Hex Outer Socket Can Wrench with Ergonomic 1" Diameter Handle, 7" Length