ASD 12" Round LED Flush Mount Light 12-Pack | Motion Sensor | White | 1788 lm 24W | 2700-6000K | Motion Sensor | 120V | Damp Rated | CRI 80+

ASD 12" Round LED Flush Mount Light 12-Pack | Motion Sensor | White | 1788 lm 24W | 2700-6000K | Motion Sensor | 120V | Damp Rated | CRI 80+

• DESIGN: A low-profile round LED panel only 15/16" deep, with a frosted acrylic lens and a 112-degree beam angle that spreads light across the room instead of pooling it under the fixture. It surface-mounts flat to the ceiling, so it fits rooms where a dome fixture hangs too low. 1788 lumens from 24W.
• COLOR SELECTABLE: 5 color temperatures in one fixture - 2700K, 3000K, 4000K, 5000K and 6000K. IMPORTANT: the selector switch sits on the side of the housing and has to be set before the panel is pushed into the mounting bracket. Once the fixture is in place the switch is no longer reachable, so pick the light color first.
• MOTION SENSOR: A built-in PIR sensor with two modes, picked by a switch on the side of the fixture. Day mode turns the light on whenever motion is detected. Night mode adds the photocell and only switches on below 70 lux, staying off above 200 lux. Detection range 9.8 to 16.4 ft, hold time 45 seconds. IMPORTANT: motion sensor models are not dimmable.
• INSTALLATION: Mounts to a standard ceiling outlet box - mounting plate, wire nuts and screws are in the box. A retrofit kit with E26 and TP24 connectors, sold separately, drops it into an existing recessed can. IMPORTANT: wall mounting is approved for indoor use only; outdoors this fixture is ceiling-mount under a covered area.
• ADVANTAGES: Rated for damp locations and ETL Listed, CRI 80 plus, 50,000-hour rated life, backed by a 5-year ASD limited warranty. Damp rated means bathrooms, covered porches and other sheltered spots - not direct exposure to rain.