ABN Aluminum Oxide Sanding Discs 25-Pack, 3in, 36 Grit - Metal Sanding Wheels for Surface Prep and Finishing Work
Product Description
ABN Aluminum Oxide Sanding Discs 25-Pack, 3in, 36 Grit - Metal Sanding Wheels for Surface Prep and Finishing Work
- [Smooth Out Your Works]: Buff out the surfaces of your vehicles and woodworking projects with the ABN Sanding Disc Set; Use sanding discs orbital sander sandpaper for surface prep and finishing work on a variety of surfaces
- [For Various Surfaces]: Sanding pads sander disc set is designed with your wood and metalwork projects in mind; Orbital sandpaper will sand down wood, plastic, fiberglass, aluminum, non-ferrous metals, and painted surfaces
- [Quality you Need]: No need to worry about these sandpaper orbital sander discs falling apart at the seams while in use; Sand paper orbital sander discs are made from high-strength aluminum oxide grain; Each are bonded with resin that is heat and load resistant
- [Easy to Use]: Grinder sanding disc set include threaded screw backing so you can efficiently attach and remove each disc sanding paper from your orbital sander (not included); Grinder disc sanding pads fit 1/4-inch mandrel shafts
- [Fit for Your Toolkit]: 36-grit aluminum oxide sanding discs will assist in sanding hardwood floors and buffing out car parts; Each orbital sander pads measure 3 inches (7.6cm) in diameter; Package includes 25 sandpaper discs
The ABN 3" Inch Aluminum Oxide Sanding Discs effectively remove rust, oxides, and coatings and leave a uniform finish on a variety of surfaces including wood, plastic, fiberglass, ferrous and non-ferrous metals, and painted surfaces. These discs are 36-grit, are 3 inches in diameter, are to be used with a 1/4-inch mandrel shaft, and come in a pack of 25. The strong aluminum oxide discs have a uniform particle size and are bonded with resin that is heat resistant for fast, quality cuts and finishes. Threaded screw backs allow for easy attachment and removal. They screw into a roloc disc holder that has a 1/4-inch mandrel shaft. You can use these discs on a 90' die grinder or straight shaft. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Technical Specifications
You might also like
ProTool 3" Roloc Disc Pad Holder - 1/4" Shank
Katzco 25 Pieces - 3 Inch 80 Grit Roll Lock Sanding and Grinding Discs - for Rotary Tools, Die Grinder, Drill, Carpenters, Woodworking
ABN Aluminum Oxide Roloc Abrasive Sanding Discs 50-Pack, 2in, 36 Grit - Metal Wheels for Surface Prep and Finishing
ABN Aluminum Oxide Roloc Abrasive Sanding Discs 50-Pack, 2in, 60 Grit - Metal Wheels for Surface Prep and Finishing
ABN 3" T27 40 Grit High Density Zirconia Alumina Flat Flap Disc Roloc Roll Lock Grinding Sanding Sandpaper Wheels 10 PK
Katzco Roll Lock Sanding and Grinding Discs - 50 Pieces - 2 inch 36 Grit - for Use with Drill and Die Grinder; for any Surface Prep or Finishing Job
ABN 2in T27 40 Grit High Density Zirconia Alumina Flat Flap Disc Roloc Roll Lock Grinding Sanding Sandpaper Wheels 10 PK
ABN 80 Grit Sandpaper Roll - 6 Inch Round Sanding Discs Aluminum Oxide Sandpaper Discs with Adhesive Back, 100Pc
Coceca 5 Pack Roloc Disc Pad Holder, Universal Quick Replacement 2 Inches, 3 Inches and 1 inch Disc Pad Holder with a Quarter Inch Shank for Polishing Round Rotating Tools