65Drones (VERY FAST) 6x15mm coreless motors with Micro-JST-1.25 plug upgrade set (A set of 4 pieces) for Tiny Whoop Inductrix Blade Cheerson CX10
Product Description
65Drones (VERY FAST) 6x15mm coreless motors with Micro-JST-1.25 plug upgrade set (A set of 4 pieces) for Tiny Whoop Inductrix Blade Cheerson CX10
- VERY Fast 6x15mm coreless motor set of 4 pieces (2 pieces of CW and 2 pieces of CCW)
- Give more thrust and power to your Tiny Whoop Inductrix and Cheerson CX10 now!
- With 70mm wire and Micro-JST-1.25mm plug so that you can just plug into your tiny whoop without soldering
- This very fast edition is close to 16000kv. Around 15930kv. (FAST version is only about 15000kv)
65Drones 6x15mm coreless motor set 6x15mm (speed: VERY fast) are perfect upgrade set for your Inductrix Blade and Cheerson CX10s. Motors come with Micro-JST-1.25mm plugs and 7cm wire that allows you to plug-and-play into your Inductrix Blade Tiny Whoop.
Special note!! Run at least 3 batteries through these at no more than 50% throttle to seat the brushes. Failure to break in will void warranty. I personally run 5 batts though mine and then let them rip.
Technical Specifications and Performance data:
- speed r/min: 59000 rpm
- operating voltage: 1.5-3.7V
- can diameter: 6mm
- can length: 15mm
- shaft diameter: 0.8mm
- shaft length: 5mm
All motor packs contain 2 pieces of clockwise and 2 pieces of counter clockwise motors. To maximise performance and life span, dont run them in reverse!
Motor rotation and correct polarity is indicated by the wire color:
- clockwise: red +, blue -
- counter clockwise: white +, black -
Technical Specifications
You might also like
Crazepony 4pcs 220mAh 50C 1S Blade Inductrix Lipo Battery 3.7V
Crazepony 4pcs Propellers Red and Tiny Whoop Eachine E010 RC Quadcopter Frame
Apex RC Products Blade Inductrix / Nano QX 6x15mm Fast 14,800kv / 55,000rpm Upgraded CW CCW Motor Set #9075
Crazepony FPV Micro AIO Camera 5.8G 40CH 25mW Transmitter with Y Splitter for FPV Drone like Blade Inductrix etc
Crazepony 1S Lipo Battery Charging Board Blade Inductrix Ultra Micro JST-PH Parallel Connect Plate mCX mCPX
BTG Propellers Props with Frame for JJRC H36 Eachine E010 and Blade Inductrix Tiny Whoop Micro Drone Parts
Blade Prop Set (4) White: Inductrix
Blade Main Frame: Inductrix
Crazepony 4pcs 5.8G FX798T FPV Brass Antenna 35mm Omnidirectional Weld Connector for FX798T FPV Micro AIO Camera
BEEBRAIN V.1 - CLEANFLIGHT/BETAFLIGHT COMPATIBLE FLIGHT CONTROLLER FOR THE TINY WHOOP - DSMX (Spektrum)