3D Print Glue, 2.11 oz Controlled Gel CA Super Glue for PLA & Printed Parts
Product Description
3D Print Glue, 2.11 oz Controlled Gel CA Super Glue for PLA & Printed Parts
- CONTROLLED PLACEMENT FOR PRINTED PARTS: Made for finished 3D printed parts, this controlled-gel CA super glue helps assemble multi-part prints and repair everyday breaks with better placement control on seams, edges, small spots, and recessed joints
- MATERIAL COMPATIBILITY: 3D print glue designed for PLA, PETG, ABS, ASA, and fully cured resin prints. Test first on nylon, TPU/TPE, and limited-flex parts. It may not bond to PE, PP, POM, PTFE, or silicone.
- 60G KIT WITH 6 APPLICATORS: Includes one 2.11 oz / 60g bottle 3d printing glue with an anti-clog cap, 3 precision tips and 3 extension tubes. Use the direct nozzle for general joints, tips for seams and small spots, and tubes for narrow or recessed areas.
- SMALL AMOUNT, BETTER RESULTS: Clean, dry and test-fit first. Apply one small dab to one surface, align and press for 15–45 seconds. Allow 24 hours for full cure before pulling, twisting or stressing the joint.
- FOR MAKERS & REPEAT PROJECTS: For 3D printing hobbyists, model and miniature builders, prop makers, prototype shops and print farms. Use for multi-part prints, broken print repairs, models, housings, magnets and inserts. Not for printer bed adhesion, oversized gaps, repeated bending, load-bearing or safety-critical repairs.
Technical Specifications
You might also like
Annuaire Historique, Volume 12 (French Edition)
Transmission Angle 2pcs Spur Gear with 10x10x500mm Gear Rack 1M 17T 15T Pinion Gear 1 Module 45 Steel Metal Gear Pinion Gear Rack Transmission Driver Shaft (Color : 10mm bore, Size : 15 Teeth)
Transmission Angle 2pcs Spur Gear with 10x10x500mm Gear Rack 1M 17T 15T Pinion Gear 1 Module 45 Steel Metal Gear Pinion Gear Rack Transmission Driver Shaft (Color : 8mm bore, Size : 15 Teeth)
Transmission Angle 2pcs Spur Gear with 10x10x500mm Gear Rack 1M 17T 15T Pinion Gear 1 Module 45 Steel Metal Gear Pinion Gear Rack Transmission Driver Shaft (Color : 8mm bore, Size : 17 Teeth)
Transmission Angle 2pcs Spur Gear with 10x10x500mm Gear Rack 1M 17T 15T Pinion Gear 1 Module 45 Steel Metal Gear Pinion Gear Rack Transmission Driver Shaft (Color : 7mm bore, Size : 15 Teeth)
Transmission Angle 2pcs Spur Gear with 10x10x500mm Gear Rack 1M 17T 15T Pinion Gear 1 Module 45 Steel Metal Gear Pinion Gear Rack Transmission Driver Shaft (Color : 6.35mm bore, Size : 15 Teeth)
Transmission Angle 2pcs Spur Gear with 10x10x500mm Gear Rack 1M 17T 15T Pinion Gear 1 Module 45 Steel Metal Gear Pinion Gear Rack Transmission Driver Shaft (Color : 7mm bore, Size : 17 Teeth)
Transmission Angle 2pcs Spur Gear with 10x10x500mm Gear Rack 1M 17T 15T Pinion Gear 1 Module 45 Steel Metal Gear Pinion Gear Rack Transmission Driver Shaft (Color : 4mm bore, Size : 15 Teeth)